RFID, oral in die wêreld.

LF / HF Reader

» Hardware » LF / HF Reader

    • spesifikasies
    • beskrywing

    model: YJ30 reeks
    frekwensie: 125KHz
    ten volle te ondersteun: uem4100 versoenbaar formaat ID-kaart (64 stukkies, Manchester kode)
    Lees card Tipe: EM4100, TK4100, EM4001, TK4101, EM4102 of versoenbaar chip
    werk af: read-only
    induksie afstand: 1~ 10cm
    kommunikasie spoed: 106Kbit / s
    Serial baud koers: 9600Kbit / s
    Lees Tyd: <100Me
    krag: DC 5V(± 5%)
    werk huidige: <100ma
    koppelvlak: RS232 / USB
    Uitbreiding I / O-koppelvlak: geen
    status aanduiding: 2-kleur LED aanduiding, krag rooi, leser groen
    Werkstemperatuur: -10℃ ~ + 70 ℃
    Stoor temperatuur: -20℃ ~ + 80 ℃
    Relatiewe humiditeit: 0~ 95%
    grootte: 110× 80 × 26mm of 105 × 70 × 12mm
    Kleur: Swart

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 meter.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Kompeterende voordeel:
    ervare personeel;
    uitstekende gehalte;
    Beste prys;
    Vinnige aflewering;
    Groot kapasiteit en 'n wye verskeidenheid van produkte;
    Aanvaar klein bestelling;
    ODM en OEM produkte volgens die kliënt se eis.

     

     

    Enquiry Form ( ons sal terug te kry wat jy so gou as moontlik )

    naam:
    *
    e-pos:
    *
    boodskap:

    Verifikasie:
    4 + 7 = ?

    Miskien het jy wil ook

  • ons Service

    RFID / IOT / Access Control
    LF / HF / UHF
    Card / Tag / Inlay / Label
    Armband / Sleutelhanger
    R / W Device
    RFID Oplossing
    OEM / ODM

  • maatskappy

    Oor ons
    Press & media
    Nuus / Blogs
    loopbane
    toekennings & resensies
    getuigskrifte
    geaffileerde program

  • Kontak Ons

    Tel:0086 755 89823301
    web:www.seabreezerfid.com