RFID, oral in die wêreld.

Module / Antenna

» Hardware » Module / Antenna

MF RC522 SPI Write / read Module vir Arduino, RS232 / RS485 koppelvlak

KATEGORIE en etikette:
Module / Antenna ,

Use Philips MFRC522 original chip design the read circuit, easy to use, low cost.

  • spesifikasies
  • beskrywing

model: SM522
huidige: 13~ 26mA / DC 3.3V
idle Huidige: 10~ 13mA / DC 3.3V
slaap huidige: <80faA
Peak huidige: <30mA
bedryfstelsel Frequency: 13.56MHz
Ondersteun tipe kaart: Mifare 1K S50, Mifare S70 4K, Mifare ultra, Mifare Pro, Mifare Desfire
dimensies: 40mm × 60 mm
Environmental Operating temperatuur: -20℃ ~ + 80 ℃
Omgewing berging temperatuur: -40℃ ~ + 85 ℃
Relatiewe humiditeit: 5%-95%

Module Interface SPI Parameters
Data-oordrag snelheid: Max.10Mbit / s

RC522 chip Introduction
MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the "Three Tables" application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1 encryption algorithms, terminology validation Mifare products. MFRC522 supports Mifare Series higher speed non-contact communication, two-way data transfer rates up to 424kbit/s. As a highly integrated 13.56MHz card reader new family of chips, MF RC522 MF RC500 and MF RC530 and there are many similarities, but also have many features and differences. It is between the host communication using SPI mode, helps to reduce connection, reduce PCB board size and cost.

RFID module Introduction
MF522-AN module adopts Philips MFRC522 original reader circuit chip design, easy to use, low cost, suitable for equipment development, development of advanced applications such reader users, the need for RF card terminal design / production of the user. This module can be loaded directly into a variety of readers molds. Module uses voltage of 3.3V, through the SPI interface simple few lines can be directly connected to the user any CPU board communication module can guarantee stable and reliable work, read long distance.

Enquiry Form ( ons sal terug te kry wat jy so gou as moontlik )


3 + 3 = ?

Miskien het jy wil ook

  • ons Service

    RFID / IOT / Access Control
    LF / HF / UHF
    Card / Tag / Inlay / Label
    Armband / Sleutelhanger
    R / W Device
    RFID Oplossing
    OEM / ODM

  • maatskappy

    Oor ons
    Press & media
    Nuus / Blogs
    toekennings & resensies
    geaffileerde program

  • Kontak Ons

    Tel:0086 755 89823301