RFID, bisan asa sa kalibutan.

LF / HF Reader

» hardware » LF / HF Reader

    • paghingalan, pagtinagsa
    • Description

    Modelo: YJ30 series
    operating frequency: 125kHz
    Fully support: uem4100 compatible format ID card (64 tipik, Manchester code)
    Read card Type: EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip
    Buhat mode: Basaha ang-lamang
    pagpasulud, pagpalingkod gilay-on: 1~ 10cm
    speed komunikasyon: 106Kbit/s
    Serial baud rate: 9600Kbit/s
    Basaha Oras: <100ms
    gahum: DC 5V(± 5%)
    Work current: <100ma
    interface: RS232/USB
    Expansion I/O interface: no
    Status indication: 2-color LED indication, power red, reader green
    operating temperatura: -10℃ ~ + 70 ℃
    Pagtipig temperatura: -20℃ ~ + 80 ℃
    Relative humidity: 0~ 95%
    Size: 110×80×26mm or 105×70×12mm
    kolor sa: Black

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 metros.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.


    competitive Bentaha:
    eksperyensiyadong mga Staff;
    Maayo Kaayo nga kalidad;
    labing maayo nga presyo;
    Puasa delivery;
    Dako nga kapasidad ug usa ka halapad nga-laing mga mga produkto;
    Dawata gamay nga order;
    ODM ug OEM mga produkto sumala sa panginahanglan ni customer.



    inquiry Form ( kita og balik kamo sa diha nga sa mahimo )

    nga mensahe:

    4 + 5 = ?

    Tingali imong gusto usab

  • sa atong Pag-alagad

    RFID / IoT / Access Control
    LF / HF / UHF
    Card / Tag / haklap / Label
    Wristband / Keychain
    R / K Device
    RFID Solusyon
    OEM / ODM

  • Company

    Mga Kanato
    press & Media
    balita / blogs
    Awards & Mga review
    pasakup Program

  • Contact Us

    Tel:0086 755 89823301