RFID, ĉie en la mondo.

LF / HF Reader

» Aparataro » LF / HF Reader

    • Specifoj
    • Priskribo

    Model: YJ30 series
    mastruma frekvenco: 125KHz
    Fully support: uem4100 compatible format ID card (64 pecoj, Manchester code)
    Read card Type: EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip
    laboro modon: Nurlegebla
    indukto distanco: 1~ 10cm
    komunikado rapido: 106Kbit/s
    Serial baud rate: 9600Kbit/s
    Legu Tempo: <100m
    potenco: DC 5V(± 5%)
    Work current: <100ma
    interfaco: RS232/USB
    Expansion I/O interface: no
    statuso indiko: 2-koloro LED indiko, potenco ruĝa, leganto verdaj
    Funkcianta temperaturon: -10℃ ~ + 70 ℃
    stokado temperaturo: -20℃ ~ + 80 ℃
    relativa humido: 0~ 95%
    grandeco: 110× 80 × 26mm aŭ 105 × 70 × 12mm
    koloro: Nigra

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 metroj.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    konkurenciva Avantaĝo:
    sperta Personaro;
    Bonege kvalito;
    Plej bone prezon;
    rapida livero;
    Grandaj kapablo kaj vasta gamo de produktoj;
    Akceptu malgrandan ordon;
    ODM kaj OEM produktojn laŭ kliento peto.

     

     

    enketo Formo ( ni respondos al vi kiel eble plej baldaŭ )

    Nomo:
    *
    Retpoŝto:
    *
    Mesaĝo:

    Verification:
    1 + 4 = ?

    Eble vi ŝatas ankaŭ

  • nia Servo

    RFID / IoT / Access Control
    LF / HF / UHF
    Karto / Tag / Inkrustaĵolaboro / Etikedo
    Wristband / Keychain
    R / W Aparato
    RFID Solvo
    OEM / ODM

  • Kompanio

    Pri ni
    Gazetaro & Amaskomunikiloj
    Novaĵoj / Blogoj
    Karieroj
    Premioj & Recenzoj
    Atestoj
    Filia Programo

  • Kontaktu nin

    Tel:0086 755 89823301
    TTT:www.seabreezerfid.com