RFID, ĉie en la mondo.

Karto Ĉirkaŭ / Akcesoraĵoj

» Karto Ĉirkaŭ / Akcesoraĵoj

  • Aŭto IC Card Holder, Aŭto IC Card Fiksa Holder, Inteligenta Karto Posedanto

    CATEGORY KAJ ETIKEDOJ:
    Karto Ĉirkaŭ / Akcesoraĵoj , , , , ,

    Produkta modelo: F273-X/F273-J

    The Smart IC Card Holder can be conveniently mounted on the glass of an automobile, allowing the RF Reader to perform at its best.

    enketo
    • Specifoj
    • Priskribo

    Suĉado Tasoj Tipo IC Card Holder
    Produkta parametroj
    Model: F273-X
    Produkta materialo: ABS / alta temperaturo hardita PC
    Produkta koloro: travidebla, blanka, aliaj koloroj
    laborante temperaturo: -35℃ ~ + 75 ℃
    stokado temperaturo: -40℃ ~ + 80 ℃
    laborante humido: 0-95%
    specifo: 90× 60 × 6.0mm, aŭ la precizigita grandeco
    Produkta pezo: 12g

    3M Pasteable Tipo IC Card Holder
    Model: F273-J
    materialo: ABS / alta temperaturo hardita PC
    koloro: travidebla, grizaj, blanka, aliaj koloroj
    laborante temperaturo: -35℃ ~ + 75 ℃
    stokado temperaturo: -40℃ ~ + 80 ℃
    laborante humido: 0-95%
    specifo: 90× 60 × 6.0mm, aŭ la precizigita grandeco
    Produkta pezo: 12g
    Efikeco: certa distanco kun vitraj, karto legi stabileco

     

    Smart IC card is mainly used for large-distance vehicle management, the installation fixed RFID cards, and other applications require fixed a standard cards. Appearance generous and practical, fixed simple, convenient to insert and take out the cards, usually adsorbed or attached to the inside of the windshield of the vehicle, it can be screwed to wood floors, shelves, walls and so on. IC card fixed holder has suction cups (adsorption cups) type holder and adhesive holder type can be selected.

    Aŭto IC Card Holder, Automobile Smart Card Holder, Smart IC Card Fixed Holder, Car Suction Cups Type IC Card Holder, Automobile 3M Pasteable IC Card Holder, de SeabreezeRFID.com

    Method of Used:
    Suĉado Tasoj Tipo IC Card Holder
    1, choose good smooth of surface, with cleaning tools to wipe clean
    2, to check whether there is dust or dirt, please go ahead to wipe clean
    3, will be suction cups press in smooth face off, all required cups outside edge in contact with the glass surface.
    4, along the outer Suction cups press with finger, make sure cups completely sealed with the glass surface.
    The front-side, left and right sides have holes, can use Suction cups or screws to fix them in the wood plate, shelves, walls, ktp.
    The back-side is equipped with suction cups, can paste on the car window

    3M Pasteable Tipo IC Card Holder
    1, choose a smooth, flat surface, wipe clean with a wiping tool
    2, press the card seat on the smooth and flat working surface forcefully, and require that all the periphery be in contact with the glass surface
    3, press with your finger on the backing cartridge to ensure that the cartridge is fully adhered to the work surface.

     

    enketo Formo ( ni respondos al vi kiel eble plej baldaŭ )

    Nomo:
    *
    Retpoŝto:
    *
    Mesaĝo:

    Verification:
    4 + 5 = ?

    Eble vi ŝatas ankaŭ

  • nia Servo

    RFID / IoT / Access Control
    LF / HF / UHF
    Karto / Tag / Inkrustaĵolaboro / Etikedo
    Wristband / Keychain
    R / W Aparato
    RFID Solvo
    OEM / ODM

  • Kompanio

    Pri ni
    Gazetaro & Amaskomunikiloj
    Novaĵoj / Blogoj
    Karieroj
    Premioj & Recenzoj
    Atestoj
    Filia Programo

  • Kontaktu nin

    Tel:0086 755 89823301
    TTT:www.seabreezerfid.com