RFID, ĉie en la mondo.

aliro Kontrolo

» Aparataro » aliro Kontrolo

KR209 Access Control Reader, Wiegand, RS232, RS485, ABA format output

CATEGORY KAJ ETIKEDOJ:
aliro Kontrolo , , , ,

Can customizable read for EM4102 and compatible ID card, Mifare 1k S50 and compatibility IC card

enketo
  • Specifoj
  • Priskribo

Model: KR209
Read card types: EM4102 and compatible ID card, Mifare 1k S50 and compatibility IC card
eligo formato: Wiegand 26 iom (default output), Wiegand 34 iom (grey wire connection can become WG34 output)
Legu distanco: 5~ 10cm
laborante frekvenco: 125KHz/13.56MHz
Response speed: < 0.2s
Read card interval: < 0.5s
Laborante tensio: DC 9V~16V (suggest using DC 12V)
Static current: < 35ma
Dynamic current: < 70ma
Extension interface: extensible RS485/RS232/ABA output format
Laboradaj Kondiĉoj: temperature -25℃~+75℃, humidity 10%~90%
Built-in speaker: zumilo
Waterproof and dustproof: jes
Enkorpigita anteno: jes
Antistatikaj: 15Kv
Over-current over-voltage protection: jes
Connection distance: Wiegand≤100 meters, RS485≤1200 meters, RS232/ABA≤10 meters
koloro: Dark Grey
grandeco: length 124×width 76×height 23.5mm
Shell materialo: PVC and powder-coated, interior can be poured black resin glue (effective waterproof)

KR209 access card reader preclude the use of advanced RF receiver circuit design and industrial-grade embedded microcontrollers, combined with efficient decoding algorithm to complete the 64bits Read-Only uem4100-compatible ID card receiver with high sensitivity, low operating current , Single DC power supply, low price, high performance. Built-in buzzer and LED indicator, simple and clear. Easy installation, complete functions, wide range of uses, is ideal for all types of access control systems.

Main features
Three-dimensional appearance, with EM, Mifare read head optional
Working current is less than 60mA
With output protection
Anti-metal shield and card reader mutual interference ability
Wiegand 26bit standard format data output
Comes with a Wiegand 26 to Wiegand 34 conversion.
In line with international standards of wiring, expandable RS232, RS485 output.
Moisture and dustproof, all sealed design and installation is simple, can be installed outdoors and other harsh conditions, no mechanical wear durable
In line with China national GB/T17626.4 standards/IEC61000-4-4 standard electrical fast transient burst immunity test (4000V, 5KHz highest test parameters).

Instructions for use
When the card is close to the card reader, the red light turns green and then turns red, the buzzer sounds to send the data, the same ID card, the interval between two readings is shorter than 500mS, no data is sent . After the card reader, if ID, IC card is still in the RF card sensor area, the reader will not do any tips, do not send data. Different ID, IC card into the RF card sensing area, card reader continuous reading, and output data.

Applicable
identigo, aliro kontrolo, partopreno, charging, sekureco, patrolo, konstrua interkomunikilo, parking management system, highway, one-card solution, e-commerce and other RFID applications.

 

konkurenciva Avantaĝo:
sperta Personaro;
Bonege kvalito;
Plej bone prezon;
rapida livero;
Grandaj kapablo kaj vasta gamo de produktoj;
Akceptu malgrandan ordon;
ODM kaj OEM produktojn laŭ kliento peto.

 

enketo Formo ( ni respondos al vi kiel eble plej baldaŭ )

Nomo:
*
Retpoŝto:
*
Mesaĝo:

Verification:
4 + 4 = ?

Eble vi ŝatas ankaŭ

  • nia Servo

    RFID / IoT / Access Control
    LF / HF / UHF
    Karto / Tag / Inkrustaĵolaboro / Etikedo
    Wristband / Keychain
    R / W Aparato
    RFID Solvo
    OEM / ODM

  • Kompanio

    Pri ni
    Gazetaro & Amaskomunikiloj
    Novaĵoj / Blogoj
    Karieroj
    Premioj & Recenzoj
    Atestoj
    Filia Programo

  • Kontaktu nin

    Tel:0086 755 89823301
    TTT:www.seabreezerfid.com