töösagedus: 125kHz
kiip: EM4100, EM4102 or its 64Bit compatible chip TK4100, jne
Kaugusseire: 2~ 10cm
töötemperatuur: -20℃ ~ + 80 ℃(-4℉ ~ + 176 ℉)
Pakkematerjalid: PVC, ABS, PET, PETG, paber
mõõdud: Thin cards 85.5×54×0.88mm
Thick cards 85.5×54×1.80mm
Kapseldamise protsess: laminated, isekleepuvad, ultrasonic encapsulation
The 18 kohaline kood / 10 kohaline kood / 8 digit code EM card is the Manchester Encoding mode, EM type 125KHz ID cards. Usually use EM4102 or TK4100 chip, has a convenient and practical, the characteristics of low cost, in worldwide, the most used RFID cards.
EM chip ID card is there is one Internal Code only, there are two types of conversion on output, one is converted to 10bits namely 16 hexadecimal 4bits, is the 10bits coded ID cards. One is converted to 8bits, namely piecewise transformation, this is the international in common use of conversion, is the 8bits coded ID card. 18bits coded ID cards, the above two type numbers are all printed on the card surface, in front of 10bits encoding, followed by 8bits encoding.
ID cards, also called: EM cards.
Number: The surface of 18 ID card number, ID itself serial number, esimene 10 ABA code, the last 8-bit Wiegand code.
ID card can be double-sided printing, screen printing/offset printing LOGO, photos, pilt, tekst, jne. Thick cards has round coil card and square coil card, and there is a long strip of holes, used to hang nylon lanyard hanging in the neck, mainly used as a time attendance card and staff card.
Konkurentsieelis:
kogenud personal;
suurepärane kvaliteet;
Parim hind;
Kiire kohaletoomine;
Suure võimsusega ja laia valikut tooteid;
Nõus väike, et;
ODM ja OEM tooteid vastavalt kliendi nõudlus.
trükkimine: Ofsettrükk, Patone tint Trükkimine, Spot-värvitrükk, siiditrükk, termotrükile, Jugaprinterid, Digitaaltrükk.
Turvaelemendid: Vesimärk, laserablatsioon, Hologramm / OVD, UV tindiga, Optiline muutuv trükivärv, Varjatud vöötkoodi / Barcode mask, Astmeline Rainbow, Micro-teksti, Giljošš, Kuum stantsimine.
teised: IC-kiibi andmete lähtestamine/krüpteerimine, Muutuvad andmed, Personaalne magnetriba programmeerida, allkiri paneel, vöötkoodi, Seerianumber, reljeefsus, DOD koodi, NBS kumera koodi, Stantsitud.