RFID, kõikjal maailmas.

Access Control

» Riistvara » Access Control

KR209G Access Control Reader, Wiegand, RS232, RS485, ABA format output

KATEGOORIA ja sildid:
Access Control , , , ,

Can customizable read for EM4102 and compatible ID card, Mifare 1k S50 and compatibility IC card

küsitlus
  • tehnilised nõuded
  • kirjeldus

mudel: KR209G
Read card types: EM4102 and compatible ID card, Mifare 1k S50 and compatibility IC card
väljund formaat: Wiegand 26 natuke (default output), Wiegand 34 natuke (grey wire connection can become WG34 output)
Loe kaugus: 5~ 10cm
töösagedus: 125KHz/13.56MHz
Response speed: < 0.2s
Read card interval: < 0.5s
tööpinge: DC 9V~16V (suggest using DC 12V)
Static current: < 35ma
Dynamic current: < 70ma
Extension interface: extensible RS485/RS232/ABA output format
Töötingimused: temperature -25℃~+75℃, humidity 10%~90%
Built-in speaker: sumisti
Waterproof and dustproof: jah
Sisseehitatud antenn: jah
Antistaatiline: 15Kv
Over-current over-voltage protection: jah
Connection distance: Wiegand≤100 meters, RS485≤1200 meters, RS232/ABA≤10 meters
värv: must
suurus: length 133×width 39.5×height 25mm
Shell materjal: PVC and powder-coated, interior can be poured black resin glue (effective waterproof)

KR209 access card reader preclude the use of advanced RF receiver circuit design and industrial-grade embedded microcontrollers, combined with efficient decoding algorithm to complete the 64bits Read-Only uem4100-compatible ID card receiver with high sensitivity, low operating current , Single DC power supply, low price, suur jõudlus. Built-in buzzer and LED indicator, simple and clear. Lihtne paigaldus, complete functions, wide range of uses, is ideal for all types of access control systems.

Main features
Three-dimensional appearance, with EM, Mifare read head optional
Working current is less than 60mA
With output protection
Anti-metal shield and card reader mutual interference ability
Wiegand 26bit standard format data output
Comes with a Wiegand 26 to Wiegand 34 conversion.
In line with international standards of wiring, expandable RS232, RS485 output.
Moisture and dustproof, all sealed design and installation is simple, can be installed outdoors and other harsh conditions, no mechanical wear durable
In line with China national GB/T17626.4 standards/IEC61000-4-4 standard electrical fast transient burst immunity test (4000V, 5KHz highest test parameters).

Instructions for use
When the card is close to the card reader, the red light turns green and then turns red, the buzzer sounds to send the data, the same ID card, the interval between two readings is shorter than 500mS, no data is sent . After the card reader, if ID, IC card is still in the RF card sensor area, the reader will not do any tips, do not send data. Different ID, IC card into the RF card sensing area, card reader continuous reading, and output data.

Applicable
identifitseerimine, juurdepääsu kontroll, kohalolek, charging, turvalisus, patrull, building intercom, parking management system, highway, one-card solution, e-commerce and other RFID applications.

 

Konkurentsieelis:
kogenud personal;
suurepärane kvaliteet;
Parim hind;
Kiire kohaletoomine;
Suure võimsusega ja laia valikut tooteid;
Nõus väike, et;
ODM ja OEM tooteid vastavalt kliendi nõudlus.

 

päringu vorm ( me võtame teiega ühendust niipea kui võimalik )

nimi:
*
Saatke:
*
sõnum:

kontrollimine:
2 + 9 = ?

Ehk soovid ka

  • meie Service

    RFID / IoT / Access Control
    LF / HF / UHF
    Card / Tag / rool / Label
    Rihm / võtmehoidja
    R / W Seadme
    RFID lahendus
    OEM / ODM

  • ettevõte

    Meist
    press & andmekandja
    Uudised / Blogid
    Karjäär
    Auhinnad & Arvustused
    Iseloomustused
    Affiliate Program

  • Võta meiega ühendust

    Tel:0086 755 89823301
    võrk:www.seabreezerfid.com