RFID, kõikjal maailmas.

Mifare 1K S50 kiipkaart

KATEGOORIA ja sildid:
HF Chip Card , , , ,

Excellent features and stability, the Mifare IC S50 chip has a wide range of applications: juurdepääsu kontroll, identifitseerimine, stored value and so on.

küsitlus
  • tehnilised nõuded
  • kirjeldus
  • aviable käsitöö

chip Type: NXP Mifare 1K S50
mälumahuga: 1KB, 8Kbit, 16 partitions, each partition two passwords(1KB=8Kbit)
töösagedus: 13.56MHz
sideprotokolli: IEC / ISO 14443 TypeA
Side kiirus: 106KBoud
Reading kaugus: 2.5~ 10cm
lugemise ajal: 1~ 2ms
töötemperatuur: -20℃ ~ + 55 ℃
vastupidavus: >100,000 korda
andmete säilitamine: >10 aastat
mõõdud: ISO standard card 85.6×54×0.80(+/-0.04)mm
Pakkematerjalid: PVC, ABS, PET, PETG, paber, 0.13mm vasktraat
pakendamise protsessis: Ultraheli auto taimeliinides, automaat keevitus

Mifare 1K S50 chip card, also known as MF M1 card or M1 card, also known as the Original S50 card, is made of Mifare 1K S50 encapsulated.
Mifare 1K S50 is NXP's excellent RFID chip products. Is the original Mifare IC S50 chip from Philips (NXP) that conforms to the IEC / ISO 14443A interface protocol. Its advanced data encryption and two-way password authentication system, ja 16 completely independent sectors, excellent features and stability, the Mifare IC S50 chip has a wide range of applications, is One Card Solutions, water meter prepaid, transit card , Highway toll, parkimine, juurdepääsu kontroll, identifitseerimine, residential management, parks, highways and other preferred RFID products, Mifare IC S50 chip in the world most widely used non-contact RF chip,
After years of technology accumulation, now there is an RF chip in China that can replace the NXP Mifare IC S50 chip, which is the FM11RF08 chip. FM11RF08 chip not only in the same performance parameters and compatible with the Mifare IC S50 chip, it has a greater advantage, is the very low cost, the same product performance, but can produce high cost-effective to ensure that your company More profit.
Mifare 1K S50 chip can be customized a variety of sizes RF chip card can also be made into a key ring, käepael (bracelet), Epoxy cards, inkrusteerima, electronic tag, a variety of applications such as labels.

Tüüpilised rakendused
Üks kaart Solutions, juurdepääsu kontroll, bus stored value cards, highway toll, parkimine, liikmekaart, VIP kaart, residential apartment building management.

 

Konkurentsieelis:
kogenud personal;
suurepärane kvaliteet;
Parim hind;
Kiire kohaletoomine;
Suure võimsusega ja laia valikut tooteid;
Nõus väike, et;
ODM ja OEM tooteid vastavalt kliendi nõudlus.

 

 

trükkimine: Ofsettrükk, Patone tint Trükkimine, Spot-värvitrükk, siiditrükk, termotrükile, Jugaprinterid, Digitaaltrükk.
Turvaelemendid: Vesimärk, laserablatsioon, Hologramm / OVD, UV tindiga, Optiline muutuv trükivärv, Varjatud vöötkoodi / Barcode mask, Astmeline Rainbow, Micro-teksti, Giljošš, Kuum stantsimine.
teised: IC-kiibi andmete lähtestamine/krüpteerimine, Muutuvad andmed, Personaalne magnetriba programmeerida, allkiri paneel, vöötkoodi, Seerianumber, reljeefsus, DOD koodi, NBS kumera koodi, Stantsitud.

päringu vorm ( me võtame teiega ühendust niipea kui võimalik )

nimi:
*
Saatke:
*
sõnum:

kontrollimine:
4 + 8 = ?

Ehk soovid ka

  • meie Service

    RFID / IoT / Access Control
    LF / HF / UHF
    Card / Tag / rool / Label
    Rihm / võtmehoidja
    R / W Seadme
    RFID lahendus
    OEM / ODM

  • ettevõte

    Meist
    press & andmekandja
    Uudised / Blogid
    Karjäär
    Auhinnad & Arvustused
    Iseloomustused
    Affiliate Program

  • Võta meiega ühendust

    Tel:0086 755 89823301
    võrk:www.seabreezerfid.com