Mionsamhail: KR209G
Léigh Cineálacha cárta: EM4102 agus cárta aitheantais ag luí, Mifare S50 1k agus comhoiriúnacht cárta IC
formáid aschur: Wiegand 26 giotán (aschur réamhshocraithe), Wiegand 34 giotán (Is féidir le nasc sreang liath bheith WG34 aschur)
achar Léigh: 5~ 10cm
minicíocht Ag obair: 125KHz / 13.56MHz
luas freagartha: < 0.2s
Léigh eatramh cárta: < 0.5s
voltas oibre: 9V ~ 16V DC (mholadh ag baint úsáide as DC 12V)
atá ann faoi láthair statach: < 35ma
atá ann faoi láthair Dinimiciúla: < 70ma
comhéadan síneadh: extensible RS485 / RS232 / ABA format aschur
coinníollacha oibre: Teocht -25 ℃ ~ + 75 ℃, taise 10% ~ 90%
Tógtha-i cainteoir: dordánaí
Uiscedhíonach agus dustproof: yes
Tógtha-i antenna: yes
fhrithstatach: 15kv
Thar-reatha ró-voltage cosaint: yes
achar Ceangal: Wiegand≤100 méadar, méadar RS485≤1200, RS232 / méadair ABA≤10
dath: Dubh
Méid: fad 133 × leithead 25mm 39.5 × airde
ábhar Shell: PVC agus púdar-brataithe, Is féidir taobh istigh a dhoirteadh gliú roisín dubh (éifeachtach uiscedhíonach)
KR209 access card reader preclude the use of advanced RF receiver circuit design and industrial-grade embedded microcontrollers, combined with efficient decoding algorithm to complete the 64bits Read-Only uem4100-compatible ID card receiver with high sensitivity, low operating current , Single DC power supply, praghas íseal, ardfheidhmíocht. Built-in buzzer and LED indicator, simple and clear. Easy installation, complete functions, wide range of uses, is ideal for all types of access control systems.
Príomhghnéithe
Three-dimensional appearance, with EM, Mifare read head optional
Working current is less than 60mA
With output protection
Anti-metal shield and card reader mutual interference ability
Wiegand 26bit standard format data output
Comes with a Wiegand 26 to Wiegand 34 conversion.
In line with international standards of wiring, expandable RS232, RS485 output.
Moisture and dustproof, all sealed design and installation is simple, can be installed outdoors and other harsh conditions, no mechanical wear durable
In line with China national GB/T17626.4 standards/IEC61000-4-4 standard electrical fast transient burst immunity test (4000V, 5KHz highest test parameters).
Instructions for use
When the card is close to the card reader, the red light turns green and then turns red, the buzzer sounds to send the data, the same ID card, the interval between two readings is shorter than 500mS, no data is sent . After the card reader, if ID, IC card is still in the RF card sensor area, the reader will not do any tips, do not send data. Different ID, IC card into the RF card sensing area, card reader continuous reading, and output data.
Applicable
Aithint, rialú rochtana, tinreamh, charging, slándála, patróil, building intercom, córas bainistíochta páirceála, highway, one-card solution, e-commerce and other RFID applications.
Buntáiste iomaíoch:
Foireann taithí;
chaighdeán den scoth;
An praghas is fearr;
seachadadh Fast;
cumas mór agus réimse leathan de tháirgí;
Glac ordú beag;
ODM agus OEM táirgí de réir an chustaiméara éileamh.
Fung
Bainisteoir Díolacháin