RFID, en todas partes do mundo.

Lector LF / HF

» Hardware » Lector LF / HF

    • Especificacións
    • Descrición

    Módulo de escritura/lectura MF RC522 SPI para Arduino: YJ30 series
    frecuencia de operación: 125KHz
    Fully support: uem4100 compatible format ID card (64 anacos, Manchester code)
    Read card Type: EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip
    modo de traballo: Só lectura
    Distancia de indución: 1~10 cm
    Communication speed: 106Kbit/s
    Serial baud rate: 9600Kbit/s
    Read Time: <100ms
    Power: DC 5V(±5 %)
    Work current: <100ma
    Interface: RS232/USB
    Expansion I/O interface: no
    Status indication: 2-color LED indication, power red, reader green
    Operating temperature: -10℃~+70℃
    temperatura de almacenamento: -20℃ ~ + 80 ℃
    Relative humidity: 0~95 %
    tamaño: 110×80×26mm or 105×70×12mm
    Cor: Black

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 metros.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Ventaxa competitiva:
    Persoal con experiencia;
    Excelente calidade;
    Mellor prezo;
    Entrega rápida;
    Gran capacidade e unha ampla gama de produtos;
    Aceptar pequeno pedido;
    Produtos ODM e OEM segundo a demanda do cliente.

     

     

    Formulario de consulta ( devolverémoste canto antes )

    Nome:
    *
    Correo electrónico:
    *
    Mensaxe:

    Verificación:
    2 + 4 = ?

    Quizais tamén che guste

  • Categorías de produtos

  • Compartir cun amigo

  • O noso servizo

    RFID / IoT / Control de acceso
    LF / HF / UHF
    Tarxeta / etiqueta / incrustación / etiqueta
    Pulseira / chaveiro
    Dispositivo R / W
    Solución RFID
    OEM / ODM

  • Compañía

    Sobre nós
    Prema & Medios de comunicación
    Novidades / Blogs
    Carreiras
    Premios & Recensións
    Testemuños
    Programa de afiliados

  • Contacte connosco

    Tel:0086 755 89823301
    Web:www.seabreezerfid.com