Tsotsa kofin Type IC Katin Mariƙin
samfurin sigogi
model: F273-X
samfurin abu: ABS / high zazzabi resistant PC
samfurin launi: m, fari, wasu launuka
aiki da zazzabi: -35℃ ~ + 75 ℃
Storage zazzabi: -40℃ ~ + 80 ℃
aiki zafi: 0-95%
Musammantawa: 90× 60 × 6.0mm, ko da kayyade size
samfurin nauyi: 12g
3M Pasteable Type IC Katin Mariƙin
model: F273-J
Material: ABS / high zazzabi resistant PC
launi: m, m, fari, wasu launuka
aiki da zazzabi: -35℃ ~ + 75 ℃
Storage zazzabi: -40℃ ~ + 80 ℃
aiki zafi: 0-95%
Musammantawa: 90× 60 × 6.0mm, ko da kayyade size
samfurin nauyi: 12g
Performance: a wasu nesa tare da gilashi, katin karanta kwanciyar hankali
Smart IC card is mainly used for large-distance vehicle management, the installation fixed RFID cards, and other applications require fixed a standard cards. Appearance generous and practical, fixed simple, convenient to insert and take out the cards, usually adsorbed or attached to the inside of the windshield of the vehicle, it can be screwed to wood floors, shelves, walls and so on. IC card fixed holder has suction cups (adsorption cups) type holder and adhesive holder type can be selected.
Method of Used:
Tsotsa kofin Type IC Katin Mariƙin
1, choose good smooth of surface, with cleaning tools to wipe clean
2, to check whether there is dust or dirt, please go ahead to wipe clean
3, will be suction cups press in smooth face off, all required cups outside edge in contact with the glass surface.
4, along the outer Suction cups press with finger, make sure cups completely sealed with the glass surface.
The front-side, left and right sides have holes, can use Suction cups or screws to fix them in the wood plate, shelves, walls, da dai sauransu.
The back-side is equipped with suction cups, can paste on the car window
3M Pasteable Type IC Katin Mariƙin
1, choose a smooth, flat surface, wipe clean with a wiping tool
2, press the card seat on the smooth and flat working surface forcefully, and require that all the periphery be in contact with the glass surface
3, press with your finger on the backing cartridge to ensure that the cartridge is fully adhered to the work surface.