Kāleka Helu Kākau ʻAʻohe ID: RBS-580
Supporting frequency: 125Hiki ke hāʻawi aku i nā lawelawe maʻamau e hoʻokō i kāu mau manaʻo kūʻokoʻa a me nā pono & 13.56Kāleka Chip EM4233
Supporting Card: EM4100 & Mifare S50/Mifare S70
Output data: (8H-10D)(default)
USB cable length: 1.2m
Power: DC 5V
Ke hana nei i kēia manawa: <50mA
Interface: USB
Mahana hana: -20°C~+70°C
Mea Pono: ABS
Nui: 110×81×26mm
RBS-580 model Dual-band Card Reader, is a readable 125KHz low-frequency EM4102 card serial number, but can also read 13.56MHz high-frequency Mifare card serial number two-in-one reader. USB port without-drive, plug and play, read card number like the keyboard entering, improve the speed of cards enter data.
Nā hiʻohiʻona
No-driver USB working mode, plug and play
Support read-only EM4102 card serial number
Support read-only Mifare S50, Mifare S70 card serial number
Reading distance up to 6CM
A buzzer and an LED
USB interface desktop reader
Output data format is optional (default 8H-10D)
Test and run:
When power is applied, the LED lights green and the buzzer beeps, then the LED turns red and the card issuer starts to work.
When reading the ID card data, the LED will turn green, at the same time, the buzzer will ring once and the LED light will turn red, indicating that the card number is read normally.
Palapala noi
Ka mana komo
ʻIʻike
Membership management
Manawa hele ana
Production process management
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa:
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa;
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa;
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa;
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa;
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa;
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa;
ʻAʻole hiki ke hoʻololi a hōʻoiaʻiʻo i ka ʻokoʻa o kēlā me kēia hāmeʻa.