Pou aspirasyon tas Kat IC Kalite Holder
pwodwi paramèt
Ki gen konpòtman egzanplè: F273-X
pwodwi materyèl: ABS / tanperati ki wo rezistan PC
koulè pwodwi: transparan, blan, lòt koulè
K ap travay tanperati: -35℃ ~ + 75 ℃
tanperati depo: -40℃ ~ + 80 ℃
K ap travay imidite: 0-95%
Specification: 90× 60 × 6.0mm, oswa gwosè a espesifye
pwodwi pwa: 12g
3M Pasteable Kat IC Kalite Holder
Ki gen konpòtman egzanplè: F273-J
Materyèl: ABS / tanperati ki wo rezistan PC
Koulè: transparan, gri, blan, lòt koulè
K ap travay tanperati: -35℃ ~ + 75 ℃
tanperati depo: -40℃ ~ + 80 ℃
K ap travay imidite: 0-95%
Specification: 90× 60 × 6.0mm, oswa gwosè a espesifye
pwodwi pwa: 12g
Pèfòmans: yon distans sèten ak vè, kat li estabilite
Smart IC card is mainly used for large-distance vehicle management, the installation fixed RFID cards, and other applications require fixed a standard cards. Appearance generous and practical, fixed simple, convenient to insert and take out the cards, usually adsorbed or attached to the inside of the windshield of the vehicle, it can be screwed to wood floors, shelves, walls and so on. IC card fixed holder has suction cups (adsorption cups) type holder and adhesive holder type can be selected.
Method of Used:
Pou aspirasyon tas Kat IC Kalite Holder
1, choose good smooth of surface, with cleaning tools to wipe clean
2, to check whether there is dust or dirt, please go ahead to wipe clean
3, will be suction cups press in smooth face off, all required cups outside edge in contact with the glass surface.
4, along the outer Suction cups press with finger, make sure cups completely sealed with the glass surface.
The front-side, left and right sides have holes, can use Suction cups or screws to fix them in the wood plate, shelves, walls, elatriye.
The back-side is equipped with suction cups, can paste on the car window
3M Pasteable Kat IC Kalite Holder
1, choose a smooth, flat surface, wipe clean with a wiping tool
2, press the card seat on the smooth and flat working surface forcefully, and require that all the periphery be in contact with the glass surface
3, press with your finger on the backing cartridge to ensure that the cartridge is fully adhered to the work surface.