RFID, dimanapun di dunia.

LF / HF Pembaca

» Perangkat keras » LF / HF Pembaca

    • spesifikasi
    • Deskripsi

    Model: seri YJ30
    Frekuensi operasi: 125KHz
    sepenuhnya mendukung: uem4100 format yang kompatibel kartu ID (64 bit, kode Manchester)
    Membaca kartu Type: EM4100, TK4100, EM4001, TK4101, EM4102 atau chip yang kompatibel
    Mode kerja: Read-only
    induksi jarak: 1~ 10cm
    kecepatan komunikasi: 106Kbit / s
    baud rate Serial: 9600Kbit / s
    Baca Waktu: <100Nona
    Kekuasaan: DC 5V(± 5%)
    saat bekerja: <100ma
    antarmuka: RS232 / USB
    Ekspansi I / O interface: tidak
    indikasi status: 2-indikasi warna LED, kekuatan merah, pembaca hijau
    Suhu Operasional: -10℃ ~ + 70 ℃
    suhu penyimpanan: -20℃ ~ + 80 ℃
    Kelembaban relatif: 0~ 95%
    Ukuran: 110× 80 × 26mm atau 105 × 70 × 12mm
    Warna: Hitam

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 meter.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Keunggulan kompetitif:
    Staf yang berpengalaman;
    kualitas yang sangat baik;
    Harga terbaik;
    Pengiriman cepat;
    kapasitas besar dan berbagai macam produk;
    Menerima pesanan kecil;
    ODM dan OEM produk sesuai dengan permintaan pelanggan.

     

     

    Formulir Kirim ( kami akan kembali Anda sesegera mungkin )

    Nama:
    *
    E-mail:
    *
    Pesan:

    Verifikasi:
    5 + 9 = ?

    Mungkin Anda menyukai juga

  • Layanan kami

    RFID / IOT / Access Control
    LF / HF / UHF
    Kartu / Tag / Inlay / Label
    Wristband / Keychain
    R / W Perangkat
    RFID Solusi
    OEM / ODM

  • Perusahaan

    Tentang kami
    tekan & Media
    Berita / blog
    karir
    Choice & ulasan
    Testimonial
    Program Afiliasi

  • Hubungi kami

    tel:0086 755 89823301
    jaringan:www.seabreezerfid.com