RFID, alls staðar í heiminum.

Card Around / Aukahlutir

» Card Around / Aukahlutir

  • Bifreið IC Card Holder, Bifreið IC Card Fastur Holder, Smart Card Holder

    FLOKKUR OG TAGS:
    Card Around / Aukahlutir , , , , ,

    The Smart IC Card Holder can be conveniently mounted on the glass of an automobile, allowing the RF Reader to perform at its best.

    fyrirspurn
    • upplýsingar
    • Lýsing

    Sogblöðkur Type IC Card Holder
    Vara breytur
    Model: F273-X
    vara efni: ABS / hár hiti þola PC
    vara lit: gegnsætt, hvítur, aðrir litir
    vinna hitastig: -35℃ ~ + 75 ℃
    Geymslu hiti: -40℃ ~ + 80 ℃
    vinna raki: 0-95%
    forskrift: 90× 60 × 7.5mm, eða tilgreindu stærð
    vara þyngd: 5g

    3M Pasteable Type IC Card Holder
    Model: F273-J
    efni: ABS / hár hiti þola PC
    Litur: gegnsætt, grá, hvítur, aðrir litir
    vinna hitastig: -35℃ ~ + 75 ℃
    Geymslu hiti: -40℃ ~ + 80 ℃
    vinna raki: 0-95%
    forskrift: 90× 60 × 7.5mm, eða tilgreindu stærð
    vara þyngd: 5g
    Frammistaða: ákveðinni fjarlægð með gleri, kort lesa stöðugleika

     

    Smart IC card is mainly used for large-distance vehicle management, the installation fixed RFID cards, and other applications require fixed a standard cards. Appearance generous and practical, fixed simple, convenient to insert and take out the cards, usually adsorbed or attached to the inside of the windshield of the vehicle, it can be screwed to wood floors, shelves , walls and so on. IC card fixed holder has suction cups (adsorption cups) type holder and adhesive holder type can be selected.

    Bifreið IC Card Holder, Automobile Smart Card Holder, Smart IC Card Fixed Holder, Car Suction Cups Type IC Card Holder, Automobile 3M Pasteable IC Card Holder, from SeabreezeRFID.com

    Method of Used
    Sogblöðkur Type IC Card Holder
    1, choose good smooth of surface, with cleaning tools to wipe clean
    2, to check whether there is dust or dirt, please go ahead to wipe clean
    3, will be hard Suction cups press in smooth face off, all required cups outside edge in contact with the glass surface.
    4, along the outer Suction cups press with finger, make sure cups completely sealed with the glass surface.
    The front-side, left and right sides have holes, can use Suction cups or screws to fix them in the wood plate, shelves, walls, etc.
    The back-side is equipped with suction cups, can paste on the car window

    3M Pasteable Type IC Card Holder
    1, choose a smooth, flat surface, wipe clean with a wiping tool
    2, press the card seat on the smooth and flat working surface forcefully, and require that all the periphery be in contact with the glass surface
    3, Press with your finger on the backing cartridge to ensure that the cartridge is fully adhered to the work surface.

     

    Fyrirspurn Form ( Við munum fá til baka þig eins fljótt og auðið er )

    heiti:
    *
    Tölvupóstur:
    *
    Message:

    Sannprófun:
    4 + 5 = ?

    Kannski þú vilt líka

  • Þjónusta okkar

    RFID / IOT / Access Control
    LF / HF / UHF
    Card / Tag / Inlay / Label
    Armband / Keychain
    R / W Tæki
    RFID lausn
    OEM / ODM

  • fyrirtæki

    Um okkur
    Press & Media
    News / Blogg
    Störf
    Verðlaun & Umsagnir
    sögur
    Affiliate Program

  • Hafðu samband við okkur

    tel:0086 755 89823301
    vefur:www.seabreezerfid.com