RFID, 사방 세계.
0086 755 89823301 seabreezerfid@gmail.com
EnglishAfrikaansAsụsụ IgboBahasa IndonesiaBahasa MelayuDanskDeutschEspañolFrançaisGaeilgeHarshen HausaItalianoKiswahiliLëtzebuergeschMagyarNederlandsNorskPolskiPortuguêsRomânăShqipSlovenčinaSlovenščinaSuomiSvenskaTagalogTiếng ViệtTürkçebasa JawaÍslenskaèdè YorùbáČeštinaΕλληνικάБългарскиМонголРусскийעבריתالعربيةहिन्दी; हिंदीবাংলাภาษาไทยမြန်မာစာአማርኛ中文(漢字)日本語한국어
 번역을 편집합니다

액세스 제어

» 하드웨어 » 액세스 제어

RS485 신호 익스텐더 갠드, RS485 변환기에 액세스 제어 리더 갠드

CATEGORY 및 태그:
액세스 제어 , , , ,

모델: SMZ-711WE

Automatically identify all Wiegand formats.

문의
  • 명세서
  • 기술

주요 기술적 인 매개 변수
전원 공급 장치: 9~24V 30mA
Communication parameters: 9600 엔 8 1
Wiegand format: Wiegand26~Wiegand80, with password keyboard; including Wiegand26/Wiegand30/Wiegand32/Wiegand34/Wiegand35/Wiegand36/Wiegand37/Wiegand40/Wiegand42/Wiegand44/Wiegand50/Wiegand56/Wiegand64/Wiegand66
치수: 46×36×18mm, including terminals 62×36×18mm
쉘 소재: ABS

The Wiegand to RS485 Signal Extender uses high anti-interference MCU processing chip, built-in watchdog circuit, automatically detects the working state of the device, automatically resets when the operation is abnormal, to ensure that the converter will never crash. The circuit board is produced by full-patch process, the wiring is reasonable, neat and beautiful, and the circuit works stably and reliably. The special joint is used to ensure convenient and reliable wiring, and it can work stably for 7×24H for a long time.
This signal extender automatically recognizes most Wiegand signal formats, from Wiegand26 to Wiegand80. Different manufacturers of different brands of access control readers can be automatically identified, no need to set up to use. This product can be custom made.
Most of the access controllers sold in the market are connected to the card reader by the Wiegand interface. The nominal transmission distance of the Wiegand signal is 100 미터, which is actually between 20 과 60 미터. In practical applications, the distance between the access controller and the card reader is often too long, which may cause the controller to fail to receive the card reader information. 따라서, Seabreeze Smart Card Co.,Ltd developed the Wiegand signal extender. The principle is to convert the Wiegand signal of the access card reader into RS485 signal, transmit it through the twisted pair, and then switch back to the Wiegand signal, so that the transmission advantage of RS485 can be fully utilized to improve the Wiegand signal. Transmission distance solves the problem of Wiegand signal transmission over long distances. Field test, this Wiegand signal extender transmission distance of more than 500 미터.

With the Seabreeze Smart Card Co.,Ltd's solution, in addition to solving the problem of reliable signal transmission, there are obvious cost advantages:
1. Wiegand signal extender is inexpensive.
2. Wiegand signal extender is easy to install and use.
3. Use low-cost super 5 network cable as the transmission line.
4. A standard network cable can transmit up to two sets of access control devices.

 

질의서 ( 우리는 가능한 한 빨리 당신을 다시 얻을 것이다 )

이름:
*
이메일:
*
메시지:

확인:
2 + 3 = ?

어쩌면 당신은 또한 같은 수

  • 우리의 서비스

    RFID / 만약 IoT / 액세스 제어
    LF / HF / UHF
    카드 / 태그 / 인레이 / 라벨
    팔찌 / 키 체인
    R / W 장치
    RFID 솔루션
    OEM / ODM

  • 회사

    회사 소개
    프레스 & 미디어
    뉴스 / 블로그
    채용 정보
    수상 & 리뷰
    후기
    제휴 프로그램

  • 문의

    전화:0086 755 89823301
    편물:www.seabreezerfid.com