RFID, iwwerall op der Welt.
0086 755 89823301 seabreezerfid@gmail.com
EnglishAfrikaansAsụsụ IgboBahasa IndonesiaBahasa MelayuDanskDeutschEspañolFrançaisGaeilgeHarshen HausaItalianoKiswahiliLëtzebuergeschMagyarNederlandsNorskPolskiPortuguêsRomânăShqipSlovenčinaSlovenščinaSuomiSvenskaTagalogTiếng ViệtTürkçebasa JawaÍslenskaèdè YorùbáČeštinaΕλληνικάБългарскиМонголРусскийעבריתالعربيةहिन्दी; हिंदीবাংলাภาษาไทยမြန်မာစာአማርኛ中文(漢字)日本語한국어
 Ännerung Iwwersetzung

Zougang Kontrolléiere

» Hardware » Zougang Kontrolléiere

  • Spezifikatioune
  • Beschreiwung

D'Wiegand Network TCP / IP Converter Modul benotzt der TCP SERVER / Client Protokoll oder d'UDP SERVER / Client Protokoll, deen kann mat der Software- Entwéckler ausgemaach ginn.
D'Default IP Adress ass 192.168.0.7 (kann no Besoin'en geännert ginn)
Default lauschteren Hafen: 20108 (kënne geännert)

Converter Gréisst: 83× 71 × 25mm
Wunnengsbau: Al durchgang

The interfaces such as RS232, RS485, and USB in the protocol converter are unified, but the protocols are not uniform. There are no international standards, national standards, and industry standards. dofir, commercially available products have different data on the same interface (data is in different forms such as hexadecimal, Längt, and format). The network card reader is an inductive card reader. After each card reading, the device number, IP address number and card number of the device are sent to a specific IP address of the network. The signal can be received and processed by a PC, a network server or other network device. (such as recording reading card events, time attendance management, patrol management), you can also send control commands to other devices (such as access controllers) to start the operation of specific functions (such as opening the door). Seabreeze Smart Card Co.,Ltd provides network converters for LAN and WAN. Through the system settings, the device ID number, IP number, card number, and card time uploaded by the network card reader can be output.
The converter comes with two Wiegand interfaces and a network RJ45 interface, which can realize two-way data conversion between the two Wiegand interfaces and the network; the Wiegand26 and Wiegand34 formats are supported by default, and can be customized according to user requirements.

Wiegand conversion Network TCP/IP module basic functions
1. The network interface uses a mature network module, 10/100M adaptive;
2. Support DHCP or fixed IP;
3. Support TCP SERVER/CLIENT; UDP SERVER/CLIENT;
4. Support settings such as gateway DNS;
5. Custom MAC address;
6. It can run across gateways, switches and routers, and is applicable to various LAN, enterprise network, Internet and other network environments;
7. Aluminum alloy casing for easy installation and use;
8. The RS485 interface is reserved on the circuit board for extended applications.

The converter requires a power supply of 9-24V 100mA. (Please determine if the reader supply voltage matches when using 24V power supply)

 

Enquêtekommissioun Form ( mir wäerten erëm Dir sou séier wéi méiglech kréien )

Numm:
*
Email:
*
Message:

kënnen:
2 + 4 = ?

Vläicht wéi Dir och

  • eis Service

    RFID / IoT / Access Kontrolléiere
    LF / HF / UHF
    Card / Tag / Inlay / Label
    Bändchen / Keychain
    R / W Gerät
    RFID Solution
    Equipment / ODM

  • Company

    Iwwert ons
    Press & Media
    Annonce / Blogs
    Carrière
    Awards & Rezensiounen
    geruff
    Fro Programm

  • Kontaktéiert eis

    Telefon:0086 755 89823301
    Web:www.seabreezerfid.com