RFID, everywhere in the world.

Module/Antenna

» Hardware » Module/Antenna

MF RC522 SPI Write/Read Module for Arduino, RS232/RS485 Interface

CATEGORY AND TAGS:
Module/Antenna ,

Use Philips MFRC522 original chip design the read circuit, easy to use, low cost.

enquiry
  • Specifications
  • Description

Model: SM522
Current: 13~26mA/DC 3.3V
Idle Current: 10~13mA/DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating Frequency: 13.56MHz
Supported card type: Mifare 1K S50, Mifare 4K S70, Mifare UltraLight, Mifare Pro, Mifare Desfire
Dimensions: 40mm×60mm
Environmental Operating temperature: -20℃~+80℃
Environment Storage temperature: -40℃~+85℃
Relative Humidity: 5%-95%

Module Interface SPI Parameters
Data Transfer Rate: Max.10Mbit/s

RC522 chip Introduction
MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the "Three Tables" application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1 encryption algorithms, terminology validation Mifare products. MFRC522 supports Mifare Series higher speed non-contact communication, two-way data transfer rates up to 424kbit/s. As a highly integrated 13.56MHz card reader new family of chips, MF RC522 MF RC500 and MF RC530 and there are many similarities, but also have many features and differences. It is between the host communication using SPI mode, helps to reduce connection, reduce PCB board size and cost.

RFID module Introduction
MF522-AN module adopts Philips MFRC522 original reader circuit chip design, easy to use, low cost, suitable for equipment development, development of advanced applications such reader users, the need for RF card terminal design / production of the user. This module can be loaded directly into a variety of readers molds. Module uses voltage of 3.3V, through the SPI interface simple few lines can be directly connected to the user any CPU board communication module can guarantee stable and reliable work, read long distance.

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Message:

Verification:
4 + 9 = ?

Maybe you like also

  • Our Service

    RFID/IoT/Access Control
    LF/HF/UHF
    Card/Tag/Inlay/Label
    Wristband/Keychain
    R/W Device
    RFID Solution
    OEM/ODM

  • Company

    About Us
    Press & Media
    News / Blogs
    Careers
    Awards & Reviews
    Testimonials
    Affiliate Program

  • Contact Us

    Tel:0086 755 89823301
    Web:www.seabreezerfid.com