RFID, mana-mana di dunia.

LF / HF Reader

» perkakasan » LF / HF Reader

    • spesifikasi
    • Penerangan

    model: siri YJ30
    kekerapan operasi: 125KHz
    menyokong penuh: uem4100 format serasi kad ID (64 bit, kod Manchester)
    Baca Jenis kad: EM4100, TK4100, EM4001, TK4101, EM4102 atau cip serasi
    mod kerja: Baca sahaja
    jarak induksi: 1~ 10cm
    kelajuan komunikasi: 106Kbit / s
    Kadar baud siri: 9600Kbit / s
    Baca Masa: <100Cik
    Kuasa: DC 5V(± 5%)
    semasa kerja-kerja: <100ma
    antara muka: RS232 / USB
    Pengembangan Saya antara muka / O: tidak
    petunjuk status: 2-petunjuk warna LED, kuasa merah, pembaca hijau
    Suhu Operasi: -10℃ ~ + 70 ℃
    suhu penyimpanan: -20℃ ~ + 80 ℃
    kelembapan relatif: 0~ 95%
    saiz: 110× 80 × 26mm atau 105 × 70 × 12mm
    Warna: Black

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 meter.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Kelebihan daya saing:
    Kakitangan yang berpengalaman;
    kualiti yang sangat baik;
    Harga terbaik;
    penghantaran cepat;
    kapasiti besar dan pelbagai jenis produk;
    Menerima pesanan yang kecil;
    ODM dan OEM produk mengikut permintaan pelanggan.

     

     

    borang pertanyaan ( kami akan kembali kepada anda secepat mungkin )

    nama:
    *
    e-mel:
    *
    mesej:

    pengesahan:
    2 + 4 = ?

    Mungkin anda suka juga

  • Perkhidmatan kami

    RFID / IOT / Kawalan Akses
    LF / HF / UHF
    Kad / Tag / Inlay / Label
    Wristband / Keychain
    R / W Peranti
    RFID Penyelesaian
    OEM / ODM

  • syarikat

    Tentang kita
    akhbar & Media
    Berita / Blogs
    Kerjaya
    Anugerah & ulasan
    testimoni
    Program Affiliate

  • Hubungi Kami

    Tel:0086 755 89823301
    web:www.seabreezerfid.com