RFID, kullimkien fid-dinja.
  • PicoPass 2KS / 16KS / 32KS chip Card, ISO 14443 Protokoll tat-Tip B / A, ISO 15693 Distanza ta 'induzzjoni tal-protokoll 1.5 metri

    KATEGORIJA U TAGS:
    Karta taċ-Ċippa HF , , , , , , ,

    KODIĊI SLI+FM11RF08 Karta taċ-Ċippa Kompost: H7076

    inkjesta
    • Speċifikazzjonijiet
    • Deskrizzjoni
    • Snajja Aviable

    IC chip parameters
    Protokoll standard: ISO 15693, ISO 14443 TypeB, ISO 14443 TypeA version optional
    Carrier frequency: 13.56MHz
    Rata baud: 26kbps -ISO 15693,106kbps -ISO 14443B or 424kbps -ISO 14443B
    Anti collision: ISO 15693 50pcs/s; ISO 14443 100pcs/s
    Unique serial number: 64 bits
    EEPROM memory size: 2Kbit; 16Kbit; 32Kbit
    Memory organization: 8 byte each block
    Secure storage area: 65534 Il-bit protezzjoni jiġri ta 'quddiem
    Charging counter: 65535 żminijiet
    Password authentication: 64bit key length
    Key areas: credit card and debit key security page
    Read/write protection and authentication: yes
    One-time write area: yes
    EEPROM cycle: >100000 żminijiet
    Żamma tad-dejta: >10 snin
    Temperatura operattiva: -40℃ ~ + 70 ℃

    Daqs tal-karta
    Thin: 85.5KODIĊI SLI+FM11RF08 Karta taċ-Ċippa Kompost
    Standard thickness Thin card: 85.5×54×1.05mm
    Ħxuna: 85.5×54×1.80mm (with a portable hole)
    Card materials: PVC/PC/PET/PETG/ABS/PHA/Paper,eċċ

    PicoPass RF IC chip is the French Inside Secure the development of a kind security chip, is a family of dual-standard contactless memory chips compliant with both ISO 14443B and ISO 15693 protocol standards. Dual standard enables to obtain higher communication speed at short distances using ISO 14443B or extended communication range using ISO 15693 in case data exchange speed is less important. It is automatically accept commands through the appropriate protocol standard.

    An optional PicoPass/A version enables the chip to communicate using ISO 14443A standard only.

    Product characteristics:
    PicoPass can communicate at up to 1.5m distance with a gate antenna and up to 70cm distance with a single antenna using ISO 15693 or at approximately 10cm using ISO 14443B or ISO 14443A standards. Fast anti-collision capability enables to treat multiple tags in the operating field.

    PicoPass 2KS contains 2 kbits of non-volatile read/write memory including personalization area protected by a fuse. PicoPass 2KS employs cryptographic security for data protection and chip authentication. Two unique secret keys are used to protect two different applications or to manage crediting and debiting of a secure stored value area. Cryptographic security protections can be disabled during personalization phase.

    PicoPass 16KS offers multi-application capabilities and/or extended data storage capabilities thanks to its 16 kbits of memory space. PicoPass 16KS can be configured as either PicoPass 2KS with a single extended application memory or as 8 fully independent PicoPass 2KS chips.

    PicoPass 32KS contains simply 2 PicoPass 16KS chips integrated on the same silicon.

    Karatteristiċi
    ISO 14443B and ISO 15693 with auto-detection, optional ISO 14443A
    Operating range up to 1.5m
    Communication speed up to 424kbps
    32k, 16k or 2k bits of EEPROM versions
    Write-once memory space for personalization data protection
    Multi-application mapping: sa 16 applications of 2k bits
    Independent credit and debit secret keys for each application
    Authentication using INSIDE's proprietary cryptographic algorithm
    PowerGuard anti-tearing function
    Fast anti-collision management: sa 100 chips/second
    Compliant with other PicoTag family
    Personalization kits available

    Applikazzjonijiet
    Multi-application cards, Kontroll tal-aċċess, Mass transit, ID cards, One card solution, Passports, Border control, Company employees cards, Bijometriċi, Payment, Health cards, City cards, Loyalty cards, eċċ.

     

     

    Stampar: Stampar Offset, Stampar tal-linka Patone, Stampar bil-kulur spot, Silkscreen Printing, Stampar termali, Stampar bil-ġett tal-linka, Stampar diġitali.
    Karatteristiċi ta 'sigurtà: Filigrana, Ablazzjoni bil-lejżer, Ologramma / OVD, Linka UV, Linka Varjabbli Ottika, Barcode moħbi / Barcode mask, Qawsalla Gradata, Mikrotest, Guilloche, Hot stamping.
    Oħrajn: Inizjalizzazzjoni tad-data taċ-ċippa IC/Encryption, Data Varjabbli, Strixxa manjetika personalizzata programmata, Panew tal-firma, Barcode, Numru tas-serje, Intaljar, Kodiċi DOD, Kodiċi konvess NBS, Die-cut.

    Formola ta 'Inkjesta ( aħna nirritornawk malajr kemm jista 'jkun )

    Isem:
    *
    Email:
    *
    Messaġġ:

    Verifika:
    5 + 3 = ?

    Forsi tħobb ukoll

  • Is-Servizz Tagħna

    RFID / IoT / Kontroll tal-Aċċess
    LF / HF / UHF
    Karta / Tag / Inlay / Label
    Wristband / Keychain
    Apparat R / W
    Soluzzjoni RFID
    OEM / ODM

  • Kumpanija

    Fuqna
    Agħfas & Midja
    Aħbarijiet / Blogs
    Karrieri
    Premjijiet & Reviżjonijiet
    Testimonjanzi
    Programm Affiljat

  • Ikkuntatjana

    Tel:0086 755 89823301
    Web:www.seabreezerfid.com