NTSHAI, qhov txhia chaw nyob hauv lub ntiaj teb.

LF/HF nyeem ntawv

» hardware » LF/HF nyeem ntawv

    • Qhia txog tej yam tshwj xeeb
    • Kev Piav Qhia Txog Kev Raug Txim

    qauv: YJ30 series
    Operating frequency: 125KHz
    Fully support: uem4100 compatible format ID card (64 yoov, Manchester code)
    Read card Type: EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip
    Work mode: Read-only
    Induction distance: 1~cwm
    Communication speed: 106Kbit/s
    Serial baud rate: 9600Kbit/s
    Read Time: <100ms
    hwj huam: DC 5V(±5%)
    Work current: <100ma
    Interface: RS232/USB
    Expansion I/O interface: no
    Status indication: 2-color LED indication, power red, reader green
    Kev kub thiab txias li cas: -10+ C~ +70°C
    Cia qhov kub: -20℃~+80℃
    Relative humidity: 0~95%
    luaj li cas: 110×80×26mm or 105×70×12mm
    xim: Dub

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 xov.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Sis tw kom zoo dua qub:
    Cov Neeg Ua Hauj Lwm Hauv Tsev Kawm Ntawv;
    Excellent zoo;
    Nqi zoo tshaj plaws;
    tus me nyuam yooj yim;
    Peev xwm loj thiab ntau hom khoom;
    Txais tau daim ntawv txiav txim me me;
    ODM thiab OEM khoom raws li tus neeg thov.

     

     

    Daim ntawv nug ( Peb yuav tau rov qab mus sai li sai tau )

    Npe:
    *
    Tus email:
    *
    lus xov:

    Qhia Txog Tej Yam Tshwm Sim:
    4 + 8 = ?

    Tej zaum koj nyiam thiab

  • Peb tus kheej

    RFID/IoT/Access tswj
    LF/HF/UHF
    Card/Tag/Inlay/Label
    Wristband/Keychain
    R/W Davice
    RFID cov zaub mov
    OEM/ODM

  • Tuam txhab

    Hais txog wb
    xovxwm & Tawm
    Moo / Blogs
    cov neeg ua hauj lwm
    txeeb & Txheeb ze
    Testimonials
    Affiliate Program

  • Hu rau Peb

    Xuas Tel:0086 755 89823301
    Web site:www.seabreezerfid.com