Viktigste tekniske parametere
Frekvens: 13.56MHz
støtte kort: støtte kort fysiske tall i henhold til ISO / IEC14443 A, ISO / IEC14443 B, ISO / IEC15693 protokoller, slik som Desfire / NTAG213 / NTAG216 / ultralette C / M1 S50 / S70 4K, Felica, HID iClass, FM1204, FM1208, etc.
Strømforsyning: DC 5V
Nåværende: ≤150mA, standby ≤30mA
Strøm og kommunikasjonsgrensesnitt: USB
Wigan output format: 26, 34, 42, 50, 58, 66 kan velges
føle~~POS=TRUNC avstand~~POS=HEADCOMP: <30mm (avhengig av kortstørrelse og programmiljø)
Arbeidstemperatur: -20℃ ~ + 60 ℃
Lager temperatur: -20℃ ~ + 70 ℃
fuktighet ved drift: 90%
Blinklys: Makt–høy lyse blå lyset, kommunikasjon–høy lyse grønt lys
The KR344 model CPU anti-cloning access control desktop card issuer is a USB driverless IC card desktop issuer, which uses a metal frame, a streamlined design, exquisite appearance and powerful functions. It is a contactless smart card issuer developed based on the ISO/IEC14443 A/B international standard protocol. It uses high-performance RF card reader circuit designed by Seabreeze Smart Card Co.,Ltd. With high integration, sterk anti-forstyrrelser evne, liten størrelse, stabil ytelse, high cost performance, lett å bruke, suitable for access control, tid og oppmøte, Én kortløsning, Prepaid solution, club or supermarket member management, anti-tyveri, patrulje, kapitalforvaltning, products Tracking identification and other RFID applications.
KR344 model CPU anti-clone access control card issuer adopts USB communication interface, no need to install driver, simple operation and stable card reading function. Support reading physical card number or content of CPU card, common Mifare 1K S50/4K S70 card, Desfire card, NTAG card, Ultralight card, Chinese resident ID card.
The Wiegand mode of this card issuer can choose Wiegand 26, 34, 42, 50, 58, 66 format.
This card issuer is easy to use. The card issuer you have received is fully set up according to your project requirements (such as the Wiegand format of the access controller). You can directly connect the USB interface of the computer and hear 6 short beeps, indicating reading. The device is successfully connected. At this time, you can read the MF card or CPU card number by swiping the user card, and the card number is immediately displayed at the position of the mouse pointer (such as the card user number data input box of your access control software, notepad file, etc. ). Because the output format has been set in advance, you do not need to set it again before you can use it.
Hovedfunksjon
Powered by USB interface, plug and play, no need drive
Reading Felica, HID iClass card physical number
Support ISO/IEC14443 TypeA, ISO/IEC14443 TypeB, ISO / IEC15693 protokoller
Fung
Salgssjef