Główne parametry techniczne
częstotliwość pracy: 125KHz
Stosowane karty: karta pastylek, 125karta KHz
Czas odczytu karty: 0.2s
indukcja odległość: 0cm
Kontrolka: 2 DOPROWADZIŁO(czerwony / biały)
Moc: Dowolny standardowy port USB lub poprzez adapter USB / 220V, lub 2 x CR2020 baterie
Temperatura pracy: -20ºC ~ + 65ºC
Materiał: Plastikowy (wodoodporny, ale nie nadaje się do trudnych warunków środowiskowych)
Obudowa z tworzywa sztucznego koloru: brązowy
Rozmiar: 100X 33 x 10 mm
The iButton Card Clone Device is a universal device for copying any electronic keys of the LF 125KHz standard and the iButton "1-drut" Touch memony standard, allowing such procedures. If the device does not support any type of keys from these standards - you can send us an email with a detailed description of the read/write protocols and we will add support for such keys to this device. Within the above standards, the programmer supports the creation of duplicate electronic keys of the following types:
●Original ID Key for copy:
1. DS1990, TM1990, RW1990(TM-08V2), RW1990.2, TM2004, KC-3 & such other
2. Keyfob/ID cards 125khz: EM-Marin, Vizit, Eltis, Cyfral, Metakom
●Blank ID Key for recording:
1. RW1990, RW1990.2, TM-08V2, RW2004(TM2004), KC-3
2. T5577/MINI5577, RW125RF, EM4305