RFID, povsod po svetu.

Modul / Antena

» Strojna oprema » Modul / Antena

MF RC522 SPI Write / Read modul za Arduino, RS232 / RS485 vmesnik

KATEGORIJA IN OZNAK:
Modul / Antena ,

Use Philips MFRC522 original chip design the read circuit, enostaven za uporabo, poceni.

povpraševanje
  • Tehnični podatki
  • Opis

Model: SM522
Trenutna: 13~ 26mA / DC 3.3V
idle Trenutna: 10~ 13mA / DC 3.3V
Sleep tok: <80uA
Peak tok: <30mA
Delovna frekvenca: 13.56MHz
Podprti tip kartice: Mifare 1K S50, Mifare S70 4K, Mifare Ultralight, Mifare Pro, Mifare Desfire
dimenzije: 40mm x 60mm
Okoljska temperatura: -20℃ ~ + 80 ℃
Temperatura okolja za shranjevanje: -40℃ ~ + 85 ℃
Relativna vlažnost: 5%-95%

Vmesnik Modul SPI Parametri
Data Transfer Rate: Max.10Mbit / s

RC522 chip Introduction
MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the "Three Tables" application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. Poleg tega, support fast CRYPTO1 encryption algorithms, terminology validation Mifare products. MFRC522 supports Mifare Series higher speed non-contact communication, two-way data transfer rates up to 424kbit/s. As a highly integrated 13.56MHz card reader new family of chips, MF RC522 MF RC500 and MF RC530 and there are many similarities, but also have many features and differences. It is between the host communication using SPI mode, helps to reduce connection, reduce PCB board size and cost.

RFID module Introduction
MF522-AN module adopts Philips MFRC522 original reader circuit chip design, enostaven za uporabo, poceni, suitable for equipment development, development of advanced applications such reader users, the need for RF card terminal design / production of the user. This module can be loaded directly into a variety of readers molds. Module uses voltage of 3.3V, through the SPI interface simple few lines can be directly connected to the user any CPU board communication module can guarantee stable and reliable work, read long distance.

povpraševanje ( bomo dobili nazaj v najkrajšem možnem času )

ime:
*
E-naslov:
*
sporočilo:

preverjanje:
5 + 8 = ?

Morda vam je všeč tudi

  • Naša storitev

    RFID / internet stvari / Access Control
    LF / HF / UHF
    Card / Tag / Inlay / Label
    Zapestnica / Keychain
    R / W Naprava
    RFID Rešitev
    OEM / ODM

  • Podjetje

    O podjetju
    Press & mediji
    Novice / Blogi
    Zaposlitev
    Nagrade & Komentarji
    Pričevanja
    Partnerski program

  • Kontaktiraj nas

    Tel:0086 755 89823301
    spletna:www.seabreezerfid.com