RFID, povsod po svetu.

Nadzor dostopa

» Strojna oprema » Nadzor dostopa

Wiegand do RS485 signalov razširitveno, Access Control Reader Wiegand do RS485 pretvornik

KATEGORIJA IN OZNAK:
Nadzor dostopa , , , ,

Model: SMZ-711WE

Automatically identify all Wiegand formats.

povpraševanje
  • Tehnični podatki
  • Opis

Glavni tehnični parametri
Napajanje: 9~ 24V 30mA
komunikacijski parametri: 9600 n 8 1
format Wiegand: Wiegand26 ~ Wiegand80, z geslom tipkovnico; Vključno Wiegand26 / Wiegand30 / Wiegand32 / Wiegand34 / Wiegand35 / Wiegand36 / Wiegand37 / Wiegand40 / Wiegand42 / Wiegand44 / Wiegand50 / Wiegand56 / Wiegand64 / Wiegand66
dimenzije: 46X 36 x 18 mm, vključno s terminali 62 x 36 x 18 mm
Shell materiala: ABS

The Wiegand to RS485 Signal Extender uses high anti-interference MCU processing chip, built-in watchdog circuit, automatically detects the working state of the device, automatically resets when the operation is abnormal, to ensure that the converter will never crash. The circuit board is produced by full-patch process, the wiring is reasonable, neat and beautiful, and the circuit works stably and reliably. The special joint is used to ensure convenient and reliable wiring, and it can work stably for 7×24H for a long time.
This signal extender automatically recognizes most Wiegand signal formats, from Wiegand26 to Wiegand80. Different manufacturers of different brands of access control readers can be automatically identified, no need to set up to use. This product can be custom made.
Most of the access controllers sold in the market are connected to the card reader by the Wiegand interface. The nominal transmission distance of the Wiegand signal is 100 metrov, which is actually between 20 in 60 metrov. In practical applications, the distance between the access controller and the card reader is often too long, which may cause the controller to fail to receive the card reader information. zato, Seabreeze Smart Card Co.,Ltd developed the Wiegand signal extender. The principle is to convert the Wiegand signal of the access card reader into RS485 signal, transmit it through the twisted pair, and then switch back to the Wiegand signal, so that the transmission advantage of RS485 can be fully utilized to improve the Wiegand signal. Transmission distance solves the problem of Wiegand signal transmission over long distances. Field test, this Wiegand signal extender transmission distance of more than 500 metrov.

With the Seabreeze Smart Card Co.,Ltd's solution, in addition to solving the problem of reliable signal transmission, there are obvious cost advantages:
1. Wiegand signal extender is inexpensive.
2. Wiegand signal extender is easy to install and use.
3. Use low-cost super 5 network cable as the transmission line.
4. A standard network cable can transmit up to two sets of access control devices.

 

povpraševanje ( bomo dobili nazaj v najkrajšem možnem času )

ime:
*
E-naslov:
*
sporočilo:

preverjanje:
0 + 4 = ?

Morda vam je všeč tudi

  • Naša storitev

    RFID / internet stvari / Access Control
    LF / HF / UHF
    Card / Tag / Inlay / Label
    Zapestnica / Keychain
    R / W Naprava
    RFID Rešitev
    OEM / ODM

  • Podjetje

    O podjetju
    Press & mediji
    Novice / Blogi
    Zaposlitev
    Nagrade & Komentarji
    Pričevanja
    Partnerski program

  • Kontaktiraj nas

    Tel:0086 755 89823301
    spletna:www.seabreezerfid.com