EA-RFID, hohle lefatšeng.

LF / HF Reader

» Lisebelisoa » LF / HF Reader

    • Litlhaloso
    • Tlhaloso

    Mohlala: YJ30 series
    Maqhubu a sebetsang: 125KHz
    Fully support: uem4100 compatible format ID card (64 likotoana, Manchester code)
    Read card Type: EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip
    Work mode: Bala feela
    Induction sebaka: 1~10cm
    Communication speed: 106Kbit/s
    Serial baud rate: 9600Kbit/s
    Read Time: <100Mof
    Matla: DC 5V(±5%)
    Work current: <100ma
    Sehokedi: RS232/USB
    Expansion I/O interface: che
    Status indication: 2-color LED indication, power red, reader green
    Mocheso oa ho sebetsa: -10℃~+70 ℃
    Mocheso oa polokelo: -20℃~+80℃
    Mongobo o amanang: 0~95%
    Boholo: 110×80×26mm or 105×70×12mm
    Mmala: Ntsho

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 limithara.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Molemo oa tlholisano:
    Basebetsi ba nang le boiphihlelo;
    Boleng bo botle;
    Theko e ntle;
    Tlhahiso e potlakileng;
    Bokhoni bo boholo le lihlahisoa tse fapaneng;
    Amohela taelo e nyane;
    Lihlahisoa tsa ODM le OEM ho latela tlhoko ea moreki.

     

     

    Foromo ea lipotso ( re tla u khutlisetsa kapele kamoo ho ka khonehang )

    Lebitso:
    *
    Imeile:
    *
    Molaetsa:

    Netefatso:
    1 + 6 = ?

    Mohlomong le uena ua rata

  • Lihlopha tsa Sehlahisoa

  • Arolelana le motsoalle

  • Ts'ebeletso ea rona

    RFID / IoT / Phihlelo ea Taolo
    LF / HF / UHF
    Karete / Tag / Inlay / Label
    Wristband / Keychain
    Sesebelisoa sa R ​​/ W
    Tharollo ea RFID
    OEM / ODM

  • Khampani

    Mabapi le rona
    Tobetsa & Mecha ea phatlalatso
    Litaba / Li-Blogs
    Mosebetsi
    Likhau & Litlhahlobo
    Bopaki
    Lenaneo la Bohokahanyi

  • Iteanye le rona

    Moh:0086 755 89823301
    Webosaete:www.samoknangtel.com