RFID, kila mahali katika ulimwengu.

LF / HF Reader

» Duka » LF / HF Reader

    • Specifications
    • Maelezo

    Model: YJ30 mfululizo
    frequency uendeshaji: 125KHz
    mkono kikamilifu: uem4100 sambamba format kitambulisho (64 bits, Manchester code)
    Kusoma kadi Aina: EM4100, TK4100, EM4001, TK4101, EM4102 au Chip sambamba
    mode kazi: Kusoma pekee
    umbali Induction: 1~ 10cm
    kasi Communication: 106Kbit / s
    Serial cha baud: 9600Kbit / s
    soma Muda: <100ms
    Power: DC 5V(± 5%)
    kazi ya sasa: <100ma
    interface: RS232 / USB
    Upanuzi I / O interface: Hapana
    hali dalili: 2-rangi LED dalili, nguvu nyekundu, msomaji kijani
    joto uendeshaji: -10℃ ~ + 70 ℃
    Uhifadhi joto: -20℃ ~ + 80 ℃
    unyevu: 0~ 95%
    size: 110× 80 × 26mm au 105 × 70 × 12mm
    Rangi: Black

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    Kama kutumika kwa ajili ya msomaji upatikanaji wa kudhibiti, kadi ya format inaweza hiari 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, hiari kuondoa sufuri za, na kuingia muhimu, pia inaweza umeboreshwa, default format 8H10D, na kuingia muhimu.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 mita.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Competitive Advantage:
    Wafanyakazi wenye uzoefu;
    bora ya shaba;
    Best bei;
    Fast utoaji;
    Uwezo mkubwa na aina mbalimbali ya bidhaa;
    Kukubali ili ndogo;
    ODM na OEM bidhaa kulingana na mahitaji ya mteja.

     

     

    Fomu uchunguzi ( sisi kupata nyuma yenu haraka iwezekanavyo )

    jina:
    *
    Barua pepe:
    *
    Ujumbe:

    Uhakiki:
    0 + 3 = ?

    Labda wewe kama pia

  • Huduma zetu za

    RFID / IOT / Access Control
    LF / HF / -bandet
    Kadi / Tag / Inlay / Label
    Wristbands / Keychain
    R / W cha Vifaa
    RFID Solution
    OEM / ODM

  • kampuni

    Kuhusu sisi
    Press & Vyombo vya habari
    News / blogs
    Kazi
    Tuzo za & Ukaguzi
    ushuhuda
    affiliate Programu ya

  • Wasiliana nasi

    tel:0086 755 89823301
    Mtandao:www.seabreezerfid.com