RFID, kila mahali katika ulimwengu.

Access Control

» Duka » Access Control

Wiegand RS485 Signal Extender, Access Control Reader Wiegand kwa RS485 Converter

CATEGORY NA TAGS:
Access Control , , , ,

Model: SMZ-711WE

Automatically identify all Wiegand formats.

uchunguzi
  • Specifications
  • Maelezo

Kuu ya kiufundi vigezo
Umeme: 9~ 24V 30mA
vigezo Communication: 9600 n 8 1
Wiegand format: Wiegand26 ~ Wiegand80, kwa nenosiri keyboard; Ikiwa ni pamoja na Wiegand26 / Wiegand30 / Wiegand32 / Wiegand34 / Wiegand35 / Wiegand36 / Wiegand37 / Wiegand40 / Wiegand42 / Wiegand44 / Wiegand50 / Wiegand56 / Wiegand64 / Wiegand66
vipimo: 46× 36 × 18mm, ikiwa ni pamoja na vituo 62 × 36 × 18mm
shell nyenzo: ABS

The Wiegand to RS485 Signal Extender uses high anti-interference MCU processing chip, built-in watchdog circuit, automatically detects the working state of the device, automatically resets when the operation is abnormal, to ensure that the converter will never crash. The circuit board is produced by full-patch process, the wiring is reasonable, neat and beautiful, and the circuit works stably and reliably. The special joint is used to ensure convenient and reliable wiring, and it can work stably for 7×24H for a long time.
This signal extender automatically recognizes most Wiegand signal formats, from Wiegand26 to Wiegand80. Different manufacturers of different brands of access control readers can be automatically identified, no need to set up to use. This product can be custom made.
Most of the access controllers sold in the market are connected to the card reader by the Wiegand interface. The nominal transmission distance of the Wiegand signal is 100 mita, which is actually between 20 na 60 mita. In practical applications, the distance between the access controller and the card reader is often too long, which may cause the controller to fail to receive the card reader information. Kwa hiyo, Seabreeze Smart Card Co.,Ltd developed the Wiegand signal extender. The principle is to convert the Wiegand signal of the access card reader into RS485 signal, transmit it through the twisted pair, and then switch back to the Wiegand signal, so that the transmission advantage of RS485 can be fully utilized to improve the Wiegand signal. Transmission distance solves the problem of Wiegand signal transmission over long distances. Field test, this Wiegand signal extender transmission distance of more than 500 mita.

With the Seabreeze Smart Card Co.,Ltd's solution, in addition to solving the problem of reliable signal transmission, there are obvious cost advantages:
1. Wiegand signal extender is inexpensive.
2. Wiegand signal extender is easy to install and use.
3. Use low-cost super 5 network cable as the transmission line.
4. A standard network cable can transmit up to two sets of access control devices.

 

Fomu uchunguzi ( sisi kupata nyuma yenu haraka iwezekanavyo )

jina:
*
Barua pepe:
*
Ujumbe:

Uhakiki:
0 + 3 = ?

Labda wewe kama pia

  • Huduma zetu za

    RFID / IOT / Access Control
    LF / HF / -bandet
    Kadi / Tag / Inlay / Label
    Wristbands / Keychain
    R / W cha Vifaa
    RFID Solution
    OEM / ODM

  • kampuni

    Kuhusu sisi
    Press & Vyombo vya habari
    News / blogs
    Kazi
    Tuzo za & Ukaguzi
    ushuhuda
    affiliate Programu ya

  • Wasiliana nasi

    tel:0086 755 89823301
    Mtandao:www.seabreezerfid.com