modelo: RU960
Ganap na suportahan ang UHF EPC Gen2(ISO18000-6C) protocol standard electronic tag
Advanced tag banggaan processing algorithm, mataas na rate ng literacy
Work frequency 840-960MHz (Ay maaring iakma ayon sa mga pangangailangan ng iba't ibang mga bansa o rehiyon)
FHSS o nakapirming dalas ay nangangahulugan ng transmisyon
output kapangyarihan: pinakamataas 20 DBM (madaling iakma)
Basahin at isulat ang distansya: read 0 ~ 600mm, isulat 0 ~ 300mm (Ang mabisang distance ay depende sa protocol, tag uri at kapaligiran)
Panloob o panlabas na pagpapadala at pagtanggap ng antena
Mababang kapangyarihan disenyo, solong 3.7V ~ 6V malawak na boltahe kapangyarihan supply ng
Suporta response (pakikipag-ugnayan) nagtatrabaho mode at aktibong trabaho mode
Aktibong work mode output format at mga parameter maaaring i-configure
sinusuportahan RS232, trigger signal, USB at iba pang mga interface, isa pang maaaring mailipat network interface RJ45 o wireless Wifi
Magbigay ng DLL, suporta para sa sekundaryong pag-unlad
laki: 120mm × 85mm × 30mm
net timbang: 210g
This ultra-compact UHF Reader is a high-performance UHF band ISO18000-6C (EPC C1G2) multi-protocol RFID reader, combined with a proprietary high-electron collision algorithm, while maintaining a high literacy rate, to achieve fast read and write electronic tag handling.Widely used in logistics, personal identity, intelligent parking lot and brake, entrance guard sistema, anti-counterfeiting security system and process control such as a variety of wireless radio frequency identification (RFID) system. Can be integrated secondary development, such as single chip ARM, with TTL level trigger signal. Can also be very short-distance to read and write operation, the dining hall to collect fees, pagdalo, at iba pa, set the power can be adjusted to read and write distance.
nota: The picture appearance according to customer demand may be slightly different, such as interfaces, there are USB,serial port RS232,etc., according to the needs select the corresponding configuration.
tip: This reader is designed for desk-top of short-distance reading and writing with low power, 3DB small antenna read 6C white card with a distance of about 0.5M. If you want to read the small antenna farther away, or require a smaller size modules do PDA or handheld UHF reader, need replace the module (this module is smaller, lower power consumption, RFID electronic tag reader distance farther, stronger anti-collision).