13.56 MHz RFID Chip for Cards or Tags
2048-bit Read/Write RFID EEPROM
ISO 14443-2 Type B Compliant
Full ISO 14443-3 Compliant Anticollision
100,000 times Write Cycle Reliability
3ms Write Time
Password and Lockwrite Protection
82 pF Tuning Capacitor
0°C~+70°C Operation
Card suurus: 85.5X 54 x 0.84mm, või kliendi määratud suurus
Pakkematerjalid: PVC / ABS / PET / PETG / Paper, 0.13 vasktraat
pakendamise protsessis: ultrasonic wave auto plant lines/Automatic Welding
AT88RF020 chip is American ATMEL company's products.The AT88RF020 is a low-end 13.56 MHz RFID (Radio Frequency IDentification) device that includes an on-chip EEPROM-based (non-volatile) memory. The wireless interface complies with Type B operation of ISO/IEC 14443. The specific sections of compliance are 14443-1, sama hästi kui 14443-2:1999(E) (dated 5/2/00) ja 14443-3:2000(E) (dated 7/13/00).
This device is designed to be used in applications where one or more RFID deviceswill be simultaneously placed within an intelligent reader/writer RF field. Communication between the RF reader/writer and this device will take place through the use of the featured anticollision command set supported by this device.
The memory contains a total of 2048 bitti, organized as 32 64-bit pages. Write operations are designed to complete in less than three milliseconds (Prl). The endurance rating for the memory is 100,000 write cycles per byte.
AT88RF020 chip supports these security features: password checking, data locking, a oneway counter and a guaranteed unique serial number.
The AT88RF020 chip includes an on-chip internal tuning capacitor that enables it to operate with a single external coil antenna. This antenna completes the RFID channel.
Tüüpilised rakendused
Enterprise and school id, school dining cards, logistics and supply management, Product manufacturing and assembly, Airline baggage handling, Mail/express parcel handling, Document tracking/library management, Animal identification, Movement time, Juurdepääsu kontroll, electronic ticket, subway ticket cards, Road automatic charging, jne.
Konkurentsieelis:
kogenud personal;
suurepärane kvaliteet;
Parim hind;
Kiire kohaletoomine;
Suure võimsusega ja laia valikut tooteid;
Nõus väike, et;
ODM ja OEM tooteid vastavalt kliendi nõudlus.
trükkimine: Ofsettrükk, Patone tint Trükkimine, Spot-värvitrükk, siiditrükk, termotrükile, Jugaprinterid, Digitaaltrükk.
Turvaelemendid: Vesimärk, laserablatsioon, Hologramm / OVD, UV tindiga, Optiline muutuv trükivärv, Varjatud vöötkoodi / Barcode mask, Astmeline Rainbow, Micro-teksti, Giljošš, Kuum stantsimine.
teised: IC-kiibi andmete lähtestamine/krüpteerimine, Muutuvad andmed, Personaalne magnetriba programmeerida, allkiri paneel, vöötkoodi, Seerianumber, reljeefsus, DOD koodi, NBS kumera koodi, Stantsitud.
Fung
Müügijuht