Main masontsivana ara-teknika
Protocol fitsipika: ISO 11785/11784, ISO 14443A / B, ISO 15693, ISO 18000-6B / 6C
Chip matetika: LF 125KHz / HF 13.56MHz / UHF 860-960MHz
Chip Type: M1 S50 / S70, M1 ULT10, ULT C, ICODE2 SLI / SLI-S / L-SLI / SLIX, SLIX-L, MF DesFi 2K / 4K / 8K, Ti2048, EM4102, EM4200, EM4305, EM4450, TK4100, T5557, CET5500, Hitag2, Hitags, FMl208(Unité centrale),sns.
Reading lavitra: LF / HF 2.5-10cm
UHF 1-15M(Araka ny haben'ny mpamaky ary ny haben'ny famandrihana)
mamaky ny fotoana: 1-2MS
Operating mari-pana: 1-2mm ny hateviny mampifanaraka hafanana: -100℃ ~ + 130 ℃ (-148℉ ~ + 266 ℉)
2-4mm ny hateviny mampifanaraka hafanana: -100℃ ~ + 150 ℃ (-148℉ ~ + 302 ℉)
miasa hamandoana: 0-95%
fiaretana: >100,000 fotoana
Data fihazonana: >10 taona
Dimensions: halavan'ny 0.7 ~ 1.2mm, habe 85.6 × 54mm, 45× 45mm, 20× 25mm, Φ16 / 18/20/30 / 50mm, afaka mamaritra ny habe & endrika
Material: PVC + Ferrite Sheet(Fampitaovana loaka), azo rakotra taratasy mivalona 3M
fonosana dingana: Ultrasonic fiara fototra andalana / Hatramin'ny otomatis
Anti-metal materials are also called metal insulation materials, ferrite materials, anti-interference materials for electronic tags, and are also commonly known as "lamba andriamby". Suitable for 13.56MHz/125KHz high-frequency cards/low-frequency cards, can be packaged into anti-metal tags, not only enables the tags to be used normally on metal and electromagnetic surfaces,
effectively reduces the absorption of antenna signals by metals, thereby increasing the antenna's sensing distance, Improve the performance of the antenna. Anti-metal tags are attached to the surface of metal products, and the induction range is generally 1~10cm.
Anti-metal smart card refers to the use of anti-metal material as a liner to play a role in preventing metal interference on the radio frequency card, to ensure that even if the radio frequency card is attached to the surface of a metal object, the card reader can read or write the IC chip. The anti-metal smart card makes full use of the lamination and punching process in the production of smart cards. It has the characteristics of simple and fast production process, and can produce anti-metal PVC smart cards of any size and specification.