Parametri tecnichi principali
Frequenza di travagliu: 125KHz
Applicable cards: iButton card, 125KHz card
Tempu di lettura di carte: 0.2s
Distanza di induzione: 0cm
Indicator light: 2 LED(red/white)
Potenza: Any standard USB Port or via USB/220V adapter, or from 2×CR2020 batteries
Temperature di travagliu: -20ºC~+65ºC
Materiale: Plastic (impermeabile, but not suitable for hard environmental conditions)
Plastic casing color: marrone
Dimensione: 100×33×10mm
The iButton Card Clone Device is a universal device for copying any electronic keys of the LF 125KHz standard and the iButton "1-wire" Touch memony standard, allowing such procedures. 
If the device does not support any type of keys from these standards - you can send us an email with a detailed description of the read/write protocols and we will add support for such keys to this device. Within the above standards, the programmer supports the creation of duplicate electronic keys of the following types:
●Original ID Key for copy:
1. DS1990, TM1990, RW1990(TM-08V2), RW1990.2, TM2004, KC-3 & such other
2. Keyfob/ID cards 125khz: EM-Marin, Vizit, Eltis, Cyfral, Metakom
●Blank ID Key for recording:
1. RW1990, RW1990.2, TM-08V2, RW2004(TM2004), KC-3
2. T5577/MINI5577, RW125RF, EM4305
Fung
Direttore di Vendite