Frequenza di travagliu: 13.56MHz
Protocollu standard: ISO/IEC15693 and ISO18000-3
Compliance card: NXP I CODICE2, TI, ST
Input voltage: AC 100-240V
Corrente di travagliu: < 5A
RF power: < 1-8W (regulabile)
Modu di travagliu: Modu host / Modu di scansione / Channel mode
Communication interface: Interfaccia RS232 / RS485 / Wiegand è TCP / IP (vuòti)
GPIO: Scalable
Infrared sensing: three sets of infrared
Maximum communication baud rate: 38400 bps
Cards peak speed: > 100pcs/sec
Distanza di ricunniscenza: 1-120cm (dual antenna)
Work area support:
US, Canada è altre regioni dopu à i Stati Uniti. FCC
Europe et autres régions suivant ETSI EN 302 208 with & without LBT regulations
Cina continentale
Giappone
Corea
Malesia
Taiwan
Ambient temperature monitoring: sustegnu
Cooling method: air cooling
Antenna appearance: (length x width x height)1556x509x72mm, base(length x width): 545x180mm
Packing size: 160x64x23cm\piece
Pesu: 25Kg/piece (set of double door with package weight 50kg)
Body material: Acrylic and sheet metal
Temperatura di travagliu: -20℃ ~ + 55 ℃
Temperatura di conservazione: -20℃ ~ + 85 ℃
Umidità di funziunamentu: < 95% @ +25℃
The ISO 15693 protocol high-frequency series of barrier-free channel gate identification devices integrate high-performance high-power readers and infrared sensors to quickly and accurately identify the entry and exit of carrying RFID cards and non-carry RFID cards personnel. The multi-directional identification of the channel and the access control attendance function can be further realized by the optional direction controller and the access controller.
This FA-253 series access control device supports reading multiple manufacturers' RFID tags conforming to ISO/IEC15693 and ISO18000-3 standards; the channel identification distance can be up to 1.2 metru (the recognition distance is related to the performance, size and on-site environment of the tag). This series of products can be widely used in accessibility conference sign-in, exhibition/concert/stadium/ordering conference and other access control systems, large factory enterprise access control attendance system.
This product can be customized for multiple antenna, 3 antennas, 4 antennas, 6 antennas and 8 antennas gate, especially suitable for access control time attendance channels.
Funzione principale
1. Integrated infrared sensor cutting analysis to accurately determine the entry and exit of carrying RFID cards personnel or non-carry RFID cards personnel to accurately prevent trailing;
2. Can integrate two-dimensional single-door two-way or two-door two-way controller and access controller (vuòti);
3. With a variety of communication interfaces: Interfaccia RS232 / RS485 / Wiegand è TCP / IP (vuòti);
4. Built-in sound and light alarm/prompt function (red light green light);
5. Using industrial grade design, can work in low temperature environment, impermeabile, antipolvere, lightning protection, anti-static design;
6. Can be customized according to the application needs of different customers;
7. The device has a noise detection function to detect whether there is electromagnetic interference in the environment.
Applicazione
Conference sign-in management system
Exhibition Management System
Concert management system
Warehousing/counting management system
Jewelry store channel management system
Apartment residential access control system
Personnel attendance channel identification management system