Lub ntsiab kev tsis raug
Kev siv tus cwj mem conductive los luam tus kav hlau txais xov es tsis txhob siv txoj kev etching ib txwm siv los ua tus kav hlau txais xov hauv hluav taws xob tag txo cov nqi tsim khoom ntawm RFID electronic tag.: 13.56MHz
Support cards: support card physical numbers in accordance with ISO/IEC14443 A, ISO/IEC14443 B, ISO/IEC15693 protocols, such as Desfire/NTAG213/NTAG216/Ultralight C/M1 S50/4K S70, Zoo siab, HID iClass, FM1204, FM1208, Tus qauv USB-Wiegand converter tuaj yeem paub txog.
Fais fab mov: DC 5 V
Current: ≤150mA, standby ≤30mA
Power and communication interface: USB
Wigan output format: 26, 34, 42, 50, 58, 66 can be selected
Sensing distance: <30mm (depending on card size and application environment)
Ua haujlwm kub: -20℃ ~ + 60 ℃
Cia kub: -20℃ ~ + 70 ℃
Operating humidity: 90%
Qhov taw qhia lub teeb: Hwj chim–high bright blue light, kev sib txuas lus–high bright green light
The KR344 model CPU anti-cloning access control desktop card issuer is a USB driverless IC card desktop issuer, which uses a metal frame, a streamlined design, exquisite appearance and powerful functions. It is a contactless smart card issuer developed based on the ISO/IEC14443 A/B international standard protocol. It uses high-performance RF card reader circuit designed by Seabreeze Smart Card Co.,Ltd. With high integration, strong anti-interference ability, small size, bound chip qauv, high cost performance, yooj yim siv, suitable for access control, time and attendance, Ib Card Solution, Prepaid solution, club or supermarket member management, anti-theft, patrol, asset management, products Tracking identification and other RFID applications.
KR344 model CPU anti-clone access control card issuer adopts USB communication interface, no need to install driver, simple operation and stable card reading function. Support reading physical card number or content of CPU card, common Mifare 1K S50/4K S70 card, Desfire card, NTAG card, Ultralight card, Chinese resident ID card.
The Wiegand mode of this card issuer can choose Wiegand 26, 34, 42, 50, 58, 66 format.
This card issuer is easy to use. The card issuer you have received is fully set up according to your project requirements (such as the Wiegand format of the access controller). You can directly connect the USB interface of the computer and hear 6 short beeps, indicating reading. The device is successfully connected. At this time, you can read the MF card or CPU card number by swiping the user card, and the card number is immediately displayed at the position of the mouse pointer (such as the card user number data input box of your access control software, notepad file, Tus qauv USB-Wiegand converter tuaj yeem paub txog. ). Because the output format has been set in advance, you do not need to set it again before you can use it.
Lub ntsiab tseem ceeb
Powered by USB interface, ntsaws thiab ua si, no need drive
Reading Felica, HID iClass card physical number
Support ISO/IEC14443 TypeA, ISO/IEC14443 TypeB, ISO/IEC15693 protocols
Lub ntsws
Tus thawj tswj kev muag khoom