model: SM522T
working current: 13~ 26mA / DC 3.3V
Idle current: 10-13mA/DC 3.3V
apicem current: <30mA
working frequency: 13.56MHz
protocol vexillum: ISO ISO 14443 TypeA
card Support: S50 Mifare 1K, S70 Mifare 4K (4 bytes ID number)
legere procul: 5cm
interface: UART TTL
Data transfer rate: max.10Mbit/s
Card reading speed: read ID number 7 times per second, read data block 3 times per second
magnitudine: 31.5mm×50mm
Working environment temperature: -20℃ ~ LXXX ℃
temperatus repono: -40LXXXV ℃ ℃ ~ +
relativum humiditas: 5%~ XCV%
MF RC522 Write/Read Module have own CPU control, without written protocol, the device via a serial port connection module immediately.
Module fully serial port control (USB/Ethernet turn serial port), without complex SPI, any platform system seamlessly, compatible with any system with the serial port (51 Microcontroller, ARMA, Linux, Arduino, Fenestra, etc.)
Only in accordance with the simple command, RFID module can easily operate the IC card reading, writing, add and subtract values (but not modify the IC card ID number)
Module automatically read the IC card ID number ((when energized, the IC card is near, IC card read automatically hexadecimal ID number, ID number issued via a serial port, need not send command)
Modules have multiple instruction and single instruction to read and write functions at the same time, the user can through an instruction is complete to read or write operation.