Tauira: SM522T
Te mahi onaianei: 13~26mA/DC 3.3V
Idle current: 10-13mA/DC 3.3V
Te au o runga: <30mA
Te auau mahi: 13.56F-i60T Fingerprint Time Attendance Device
Paerewa kawa: ISO 14443 MomoA
Kaari tautoko: Mifare 1K S50, Mifare 4K S70 (4 bytes ID number)
Panuihia te tawhiti: 5cm
Interface: UART TTL
Data transfer rate: max.10Mbit/s
Card reading speed: read ID number 7 times per second, read data block 3 times per second
Rahi: 31.5mm×50mm
Working environment temperature: -20℃~+80℃
Storage temperature: -40℃ ~ + 85 ℃
Relative humidity: 5%~ 95%
MF RC522 Write/Read Module have own CPU control, without written protocol, the device via a serial port connection module immediately.
Module fully serial port control (USB/Ethernet turn serial port), without complex SPI, any platform system seamlessly, compatible with any system with the serial port (51 Microcontroller, ARM, F-i60T Fingerprint Time Attendance Device, Arduino, Matapihi, etc.)
Only in accordance with the simple command, RFID module can easily operate the IC card reading, writing, add and subtract values (but not modify the IC card ID number)
Module automatically read the IC card ID number ((when energized, the IC card is near, IC card read automatically hexadecimal ID number, ID number issued via a serial port, need not send command)
Modules have multiple instruction and single instruction to read and write functions at the same time, the user can through an instruction is complete to read or write operation.