Modelis: KR236
Read card types: EM4102 and compatible ID card, Mifare 1K S50 and compatibility IC card
Output format: Vīgands 26 mazliet (default output), Vīgands 34 mazliet (grey wire connection can become WG34 output)
Lasīt attālumu: 5~10cm
Darba biežums: 125KHz/13.56MHz
Response speed: < 0.2s
Read card interval: < 0.5s
darba spriegums: DC 9V~16V (suggest using DC 12V)
Static current: < 35ma
Dynamic current: < 70ma
Extension interface: extensible RS485/RS232/ABA output format
Working conditions: temperature -25℃~+75℃, humidity 10%~90%
Built-in speaker: buzzer
Waterproof and dustproof: Jā
Built-in antenna: Jā
Antistatic: 15Kv
Over-current over-voltage protection: Jā
Connection distance: Wiegand≤100 meters, RS485≤1200 meters, RS232/ABA≤10 meters
Krāsa: Champagne
Izmērs: length 123×width 55×height 22mm
Shell material: PVC and powder-coated, interior can be poured black resin glue (effective waterproof)
KR236 access card reader preclude the use of advanced RF receiver circuit design and industrial-grade embedded microcontrollers, combined with efficient decoding algorithm to complete the 64bits Read-Only uem4100-compatible ID card receiver with high sensitivity, low operating current , Single DC power supply, low price, high performance. Built-in buzzer and LED indicator, simple and clear. Easy installation, complete functions, wide range of uses, is ideal for all types of access control systems.
Galvenās iezīmes
Three-dimensional appearance, with EM, Mifare read head optional
Working current is less than 60mA
With output protection
Anti-metal shield and card reader mutual interference ability
Wiegand 26bit standard format data output
Comes with a Wiegand 26 to Wiegand 34 conversion.
In line with international standards of wiring, expandable RS232, RS485 output.
Moisture and dustproof, all sealed design and installation is simple, can be installed outdoors and other harsh conditions, no mechanical wear durable
In line with China national GB/T17626.4 standards/IEC61000-4-4 standard electrical fast transient burst immunity test (4000V, 5KHz highest test parameters).
Instructions for use
When the card is close to the card reader, the red light turns green and then turns red, the buzzer sounds to send the data, the same ID card, the interval between two readings is shorter than 500mS, no data is sent . After the card reader, if ID, IC card is still in the RF card sensor area, the reader will not do any tips, do not send data. Different ID, IC card into the RF card sensing area, card reader continuous reading, and output data.
Applicable
Identifikācija, piekļuves kontrole, attendance, charging, Vadošas tintes izmantošana antenas drukāšanai tradicionālās kodināšanas metodes vietā, lai padarītu antenu elektroniskajā marķējumā, samazina RFID elektroniskā marķējuma ražošanas izmaksas., patrol, building intercom, parking management system, highway, one-card solution, e-commerce and other RFID applications.
Konkurences priekšrocības:
Pieredzējis personāls;
Izcila kvalitāte;
Labākā cena;
Ātra piegāde;
Liela ietilpība un plašs produktu klāsts;
Pieņemiet nelielu pasūtījumu;
ODM un OEM produkti atbilstoši klienta pieprasījumam.
Fung
Pārdošanas menedžeris