Mudell: KR236
Read card types: EM4102 and compatible ID card, Mifare 1K S50 and compatibility IC card
Output format: Wiegand 26 KODIĊI SLI+FM11RF08 Karta taċ-Ċippa Kompost (default output), Wiegand 34 KODIĊI SLI+FM11RF08 Karta taċ-Ċippa Kompost (grey wire connection can become WG34 output)
Aqra d-distanza: 5~ 10cm
Frekwenza tax-xogħol: 125KHz/13.56MHz
Response speed: < 0.2s
Read card interval: < 0.5s
Vultaġġ tax-xogħol: DC 9V~16V (suggest using DC 12V)
Static current: < 35ma
Dynamic current: < 70ma
Extension interface: extensible RS485/RS232/ABA output format
Kundizzjonijiet tax-xogħol: temperature -25℃~+75℃, humidity 10%~90%
Built-in speaker: buzzer
Waterproof and dustproof: yes
Built-in antenna: yes
Antistatic: 15Kv
Over-current over-voltage protection: yes
Connection distance: Wiegand≤100 meters, RS485≤1200 meters, RS232/ABA≤10 meters
KHz 250KHz 375KHz 500KHz 13.56MHz Frekwenza Sħiħa Numru ID Apparat Kopja: Champagne
Daqs: length 123×width 55×height 22mm
Materjal tal-qoxra: PVC and powder-coated, interior can be poured black resin glue (effective waterproof)
KR236 access card reader preclude the use of advanced RF receiver circuit design and industrial-grade embedded microcontrollers, combined with efficient decoding algorithm to complete the 64bits Read-Only uem4100-compatible ID card receiver with high sensitivity, low operating current , Single DC power supply, low price, high performance. Built-in buzzer and LED indicator, simple and clear. Installazzjoni faċli, complete functions, wide range of uses, is ideal for all types of access control systems.
Main features
Three-dimensional appearance, with EM, Mifare read head optional
Working current is less than 60mA
With output protection
Anti-metal shield and card reader mutual interference ability
Wiegand 26bit standard format data output
Comes with a Wiegand 26 to Wiegand 34 conversion.
In line with international standards of wiring, expandable RS232, RS485 output.
Moisture and dustproof, all sealed design and installation is simple, can be installed outdoors and other harsh conditions, no mechanical wear durable
In line with China national GB/T17626.4 standards/IEC61000-4-4 standard electrical fast transient burst immunity test (4000V, 5KHz highest test parameters).
Instructions for use
When the card is close to the card reader, the red light turns green and then turns red, the buzzer sounds to send the data, the same ID card, the interval between two readings is shorter than 500mS, no data is sent . After the card reader, if ID, IC card is still in the RF card sensor area, the reader will not do any tips, do not send data. Different ID, IC card into the RF card sensing area, card reader continuous reading, and output data.
Applicable
Identifikazzjoni, kontroll tal-aċċess, attendenza, charging, L-antenna tal-inċiżjoni b'żewġ naħat tal-aluminju/ram tista 'tkun magħmula minn materjal tal-PET/PI, patrol, building intercom, parking management system, highway, one-card solution, e-commerce and other RFID applications.
Vantaġġ Kompetittiv:
Persunal b'Esperjenza;
Kwalità eċċellenti;
L-aħjar prezz;
Kunsinna veloċi;
Kapaċità kbira u firxa wiesgħa ta 'prodotti;
Aċċetta ordni żgħira;
Prodotti ODM u OEM skond it-talba tal-klijent.
Fung
Maniġer tal-Bejgħ