RFID, kullimkien fid-dinja.

Karta Ħoxna

» Karta RFID » Karta Ħoxna

Karta Ħoxna tal-ID abjad

KATEGORIJA U TAGS:
Karta Ħoxna , , , ,

125KHz ID Thick Card, convenient and practical, suitable for low-cost access control and identification solutions.

inkjesta
  • Speċifikazzjonijiet
  • Deskrizzjoni

Ċippa: EM4102, TK4100, TK4101 COB
Frekwenza: 125Jista 'wkoll joffri servizzi personalizzati biex jissodisfa l-ideat u l-bżonnijiet esklussivi tiegħek
Work mode: read-only
Distanza ta 'induzzjoni: 8~20cm
Internal serial code: 5 bytes
Wipe: >100,000 żminijiet
Ħażna tad-dejta: 10 snin
Materjal: ABS
Daqs: 85.5x54mm
Ħxuna: 1.8mm
Temperatura tax-xogħol: -20℃~+80℃ (-4℉~+176℉)

ID Card full called Identification Card, it is a kind of chip can't write data induction card, have a fixed code, there are mainly Taiwan SYRIS EM format and the United States HIDMOTOROLA format and other kinds of ID Card. ID card same with magnetic stripe card, just use the "card number", in addition to the card number, the inside of the card does not have any secret function, card number is open, naked. So ID card is the "inductive magnetic card" .
Thick ID card is the most economic of rf IC card, with an ID number ( can surface printing 18 digit or 10 digit, 8 digit number ), with a portable hole, can screen printing LOGO or text information.
Thin ID card surface can offset printing, screen printing, printing portraits, can surface printing 18 digit or 10 digit, 8 digit number.
ID thick card usually use 125KHz EM4102, TK4100, TK4101 chip, 13.56MHz chip can also be used, such as FM11RF08 or Mifare 1K S50.
The induction coil inside the 125KHz ID thick card has a large rectangular coil and a circular coil to choose from. Large rectangular coil read distance a little longer.

Main characteristics
Carrier frequency 125KHz (THRC12) or 13.56MHz (THRC13);
The modulation mode of the card transmitting data to the reader is loading amplitude modulation;
Card encoding data within use the high anti-jamming ability of BPSK phase shift keying;
The card reader data transfer rate is 3.9kbps (THRC12) or 6.62kbps (THRC13);
Card to the card reader data transfer rate of 3.9 KBPS (THRC12) addattat biex teħel fuq wiċċ tal-metall 6.62 KBPS (THRC13);
The data store adopts EEPROM, the data preservation time exceeds 10 snin;
Data storage capacity of 64 bits, including manufacturers, distributors and user code;
The card number can not be changed after the encapsulation card is written before, the card number is absolutely guaranteed the uniqueness and security;
THRC13 chips are encapsulation in addition to standard card shapes, and can also be encapsulation as token and many other shapes depending on the application.

Applikazzjoni
Apply to identification, attendenza tal-ħin, kontroll tal-aċċess, entrance guard system, property identification, patrolling system, enterprises One Card Solution, and other of the radio frequency identification IC card system.

Formola ta 'Inkjesta ( aħna nirritornawk malajr kemm jista 'jkun )

Isem:
*
Email:
*
Messaġġ:

Verifika:
0 + 9 = ?

Forsi tħobb ukoll

  • Is-Servizz Tagħna

    RFID / IoT / Kontroll tal-Aċċess
    LF / HF / UHF
    Karta / Tag / Inlay / Label
    Wristband / Keychain
    Apparat R / W
    Soluzzjoni RFID
    OEM / ODM

  • Kumpanija

    Fuqna
    Agħfas & Midja
    Aħbarijiet / Blogs
    Karrieri
    Premjijiet & Reviżjonijiet
    Testimonjanzi
    Programm Affiljat

  • Ikkuntatjana

    Tel:0086 755 89823301
    Web:www.seabreezerfid.com