Parametro Teknikoak
Energia hornidura: DC5V
Oraingoa: 30mA
Funtzionamendu maiztasuna: 125KHz±1KHz
Lan egiteko modua: Irakurtzeko soilik
Support card: uEM4001/uEM4102 or compatible EM ID card (125KHz, 64-divided, 64-bit Manchester encoding)
Reading distance: max 6cm, sensing range depends on card shape and antenna size
Reading method: read the card according to the order
Reading speed: <250anderea
Laneko tenperatura: -10℃~+75℃
Module size: 28.3×29.6mm
SMRF125-5 model ID Card Read Module, can connect 5 reader antennas, read the card number on each antenna at the same time, and output the card number through the serial port.
The inductance of the induction antenna is 345uH±5%, the common antenna size is 50×70mm or 40×60mm, and the round diameter 35mm. Quantity 50 or more, antenna size can be customized.
Multi-channel ID card reader module can be customized.
SMRF125-5 reader module is mainly used in parking lot, identifikazioa, attendance, sarbide kontrola, channel and other systems.
Working principle
After the module is powered on, it is in the waiting command state (connecting the power and antenna). After receiving the reading command, the module will read the card number corresponding to a certain reading card coil according to the command, and then return data. After all the returned data is sent, the module enters the waiting command state again and waits for the next reading.
The module input/output is TTL-RS232 ASCII data output (serial output, TTL level) 9600 bps,n,8,1 (baud rate 9600 no check digit data 8 pixka bat 1 stop bit) (can also output according to customer requirements).
Onddoa
Salmenten kudeatzailea