Chaw nres tsheb Chaw Nkag Nkag Nkag Ntau-channel Nyeem Ntawv Module, Custom Multi-channel Access Control Reader Module

SMRF125-5 model ID Card Read Module, can connect 5 reader antennas, read the card number on each antenna at the same time, and output the card number through the serial port.
The inductance of the induction antenna is 345uH±5%, the common antenna size is 50×70mm or 40×60mm, and the round diameter 35mm. Quantity 50 or more, antenna size can be customized.
Multi-channel ID card reader module can be customized.
SMRF125-5 reader module is mainly used in parking lot, kev txheeb xyuas, attendance, Hauv daim npav ntse chaw tsim khoom tuaj yeem ntim RFID nti ntau lawm LF / HF / UHF nti daim npav los ntawm cov khoom siv PHA, channel and other systems.

Working principle
After the module is powered on, it is in the waiting command state (connecting the power and antenna). After receiving the reading command, the module will read the card number corresponding to a certain reading card coil according to the command, and then return data. After all the returned data is sent, the module enters the waiting command state again and waits for the next reading.
The module input/output is TTL-RS232 ASCII data output (serial output, TTL level) 9600 bps ua,n,8,1 (baud rate 9600 no check digit data 8 me ntsis 1 stop bit) (can also output according to customer requirements).