Technikai paraméterek
Tápegység: DC5V
Jelenlegi: 30mA
Működési frekvencia: 125KHz ± 1 kHz
Működési mód: Csak olvasható
Support kártya: uEM4001 / uEM4102 vagy kompatibilis EM igazolvány (125KHz, 64-megosztott, 64-bit Manchester kódolás)
Olvasási távolság: max 6 cm, hatótávolság függ a kártya alakú és méretű antenna
olvasás módszer: olvassa el a kártya szerint a sorrendben
olvasási sebesség: <250Kisasszony
Üzemhőmérséklet: -10℃ ~ + 75 ℃
modul mérete: 28.3× 29.6mm
SMRF125-5 model ID Card Read Module, can connect 5 reader antennas, read the card number on each antenna at the same time, and output the card number through the serial port.
The inductance of the induction antenna is 345uH±5%, the common antenna size is 50×70mm or 40×60mm, and the round diameter 35mm. Quantity 50 vagy több, antenna size can be customized.
Multi-channel ID card reader module can be customized.
SMRF125-5 reader module is mainly used in parking lot, azonosítás, részvétel, hozzáférés-szabályozás, channel and other systems.
Working principle
After the module is powered on, it is in the waiting command state (connecting the power and antenna). After receiving the reading command, the module will read the card number corresponding to a certain reading card coil according to the command, and then return data. After all the returned data is sent, the module enters the waiting command state again and waits for the next reading.
The module input/output is TTL-RS232 ASCII data output (serial output, TTL szint) 9600 bps,n,8,1 (átviteli sebesség 9600 no check digit data 8 bit 1 stop bit) (can also output according to customer requirements).