Các thông số kỹ thuật
Cung cấp năng lượng: DC5V
Hiện hành: 30mA
Băng tần hoạt động: 125KHz ± 1KHz
Chế độ làm việc: Chỉ đọc
hỗ trợ thẻ: uEM4001 / uEM4102 hoặc CMND EM tương thích (125KHz, 64-chia, 64-chút mã hóa Manchester)
khoảng cách đọc: max 6cm, phạm vi cảm biến phụ thuộc vào hình dạng thẻ và kích thước ăng ten
phương pháp đọc: đọc thẻ theo thứ tự
Tốc độ đọc: <250Cô
Nhiệt độ làm việc: -10℃ ~ + 75 ℃
kích thước mô-đun: 28.329.6mm ×
SMRF125-5 model ID Card Read Module, can connect 5 reader antennas, read the card number on each antenna at the same time, and output the card number through the serial port.
The inductance of the induction antenna is 345uH±5%, the common antenna size is 50×70mm or 40×60mm, and the round diameter 35mm. Quantity 50 or more, antenna size can be customized.
Multi-channel ID card reader module can be customized.
SMRF125-5 reader module is mainly used in parking lot, nhận biết, sự tham dự, kiểm soát truy cập, channel and other systems.
Working principle
After the module is powered on, it is in the waiting command state (connecting the power and antenna). After receiving the reading command, the module will read the card number corresponding to a certain reading card coil according to the command, and then return data. After all the returned data is sent, the module enters the waiting command state again and waits for the next reading.
The module input/output is TTL-RS232 ASCII data output (serial output, mức TTL) 9600 bps,n,8,1 (tốc độ truyền 9600 no check digit data 8 chút 1 stop bit) (can also output according to customer requirements).