RFID, Mindenütt a világon.
0086 755 89823301 seabreezerfid@gmail.com
EnglishAfrikaansAsụsụ IgboBahasa IndonesiaBahasa MelayuDanskDeutschEspañolFrançaisGaeilgeHarshen HausaItalianoKiswahiliLëtzebuergeschMagyarNederlandsNorskPolskiPortuguêsRomânăShqipSlovenčinaSlovenščinaSuomiSvenskaTagalogTiếng ViệtTürkçebasa JawaÍslenskaèdè YorùbáČeštinaΕλληνικάБългарскиМонголРусскийעבריתالعربيةहिन्दी; हिंदीবাংলাภาษาไทยမြန်မာစာአማርኛ中文(漢字)日本語한국어
 Fordítás szerkesztése

Hozzáférés-szabályozás

» Hardver » Hozzáférés-szabályozás

Wiegand RS485 Signal Extender, Access Control Reader Wiegand RS485 Converter

KATEGÓRIA és címkék:
Hozzáférés-szabályozás , , , ,

Modell: SMZ-711WE

Automatically identify all Wiegand formats.

vizsgálat
  • Műszaki adatok
  • Leírás

Főbb műszaki paraméterek
Tápegység: 9~ 24V 30mA
Kommunikációs paraméterek: 9600 n 8 1
Wiegand formátum: Wiegand 26 ~ Wiegand80, jelszóval billentyűzet; Beleértve Wiegand 26 / Wiegand30 / Wiegand32 / Wiegand34 / Wiegand35 / Wiegand36 / Wiegand37 / Wiegand40 / Wiegand42 / Wiegand44 / Wiegand50 / Wiegand56 / Wiegand64 / Wiegand66
Méretek: 46× 36 × 18mm, beleértve terminálok 62 × 36 × 18mm
Shell anyag: ABS

The Wiegand to RS485 Signal Extender uses high anti-interference MCU processing chip, built-in watchdog circuit, automatically detects the working state of the device, automatically resets when the operation is abnormal, to ensure that the converter will never crash. The circuit board is produced by full-patch process, the wiring is reasonable, neat and beautiful, and the circuit works stably and reliably. The special joint is used to ensure convenient and reliable wiring, and it can work stably for 7×24H for a long time.
This signal extender automatically recognizes most Wiegand signal formats, from Wiegand26 to Wiegand80. Different manufacturers of different brands of access control readers can be automatically identified, no need to set up to use. This product can be custom made.
Most of the access controllers sold in the market are connected to the card reader by the Wiegand interface. The nominal transmission distance of the Wiegand signal is 100 méter, which is actually between 20 és 60 méter. In practical applications, the distance between the access controller and the card reader is often too long, which may cause the controller to fail to receive the card reader information. Ebből adódóan, Seabreeze Smart Card Co.,Ltd developed the Wiegand signal extender. The principle is to convert the Wiegand signal of the access card reader into RS485 signal, transmit it through the twisted pair, and then switch back to the Wiegand signal, so that the transmission advantage of RS485 can be fully utilized to improve the Wiegand signal. Transmission distance solves the problem of Wiegand signal transmission over long distances. Field test, this Wiegand signal extender transmission distance of more than 500 méter.

With the Seabreeze Smart Card Co.,Ltd's solution, in addition to solving the problem of reliable signal transmission, there are obvious cost advantages:
1. Wiegand signal extender is inexpensive.
2. Wiegand signal extender is easy to install and use.
3. Use low-cost super 5 network cable as the transmission line.
4. A standard network cable can transmit up to two sets of access control devices.

 

Érdeklődés ( mi lesz akkor a lehető leghamarabb )

Név:
*
Email:
*
Üzenet:

Igazolás:
0 + 6 = ?

Talán tetszik is

  • A mi szolgáltatásunk

    RFID / tárgyak internete / Access Control
    LF / HF / UHF
    Card / Tag / Inlay / címke
    Karszalag / kulcstartó
    R / W Device
    RFID megoldás
    OEM / ODM

  • Vállalat

    Rólunk
    nyomja meg & Média
    hírek / Blogok
    Karrier
    Díjak & Vélemények
    Beszámolók
    Partnerprogram

  • Lépjen kapcsolatba velünk

    Tel:0086 755 89823301
    háló:www.seabreezerfid.com