RFID, dimanapun di dunia.

Kontrol akses

» Perangkat keras » Kontrol akses

Wiegand untuk RS485 Sinyal Extender, Access Control Pembaca Wiegand ke RS485 Converter

KATEGORI DAN TAGS:
Kontrol akses , , , ,

Model: SMZ-711WE

Automatically identify all Wiegand formats.

penyelidikan
  • spesifikasi
  • Deskripsi

parameter teknis utama
Sumber Daya listrik: 9~ 24V 30mA
parameter komunikasi: 9600 n 8 1
Format Wiegand: Wiegand26 ~ Wiegand80, dengan keyboard sandi; Termasuk Wiegand26 / Wiegand30 / Wiegand32 / Wiegand34 / Wiegand35 / Wiegand36 / Wiegand37 / Wiegand40 / Wiegand42 / Wiegand44 / Wiegand50 / Wiegand56 / Wiegand64 / Wiegand66
Ukuran: 46× 36 × 18mm, termasuk terminal 62 × 36 × 18mm
bahan shell: ABS

The Wiegand to RS485 Signal Extender uses high anti-interference MCU processing chip, built-in watchdog circuit, automatically detects the working state of the device, automatically resets when the operation is abnormal, to ensure that the converter will never crash. The circuit board is produced by full-patch process, the wiring is reasonable, neat and beautiful, and the circuit works stably and reliably. The special joint is used to ensure convenient and reliable wiring, and it can work stably for 7×24H for a long time.
This signal extender automatically recognizes most Wiegand signal formats, from Wiegand26 to Wiegand80. Different manufacturers of different brands of access control readers can be automatically identified, no need to set up to use. This product can be custom made.
Most of the access controllers sold in the market are connected to the card reader by the Wiegand interface. The nominal transmission distance of the Wiegand signal is 100 meter, which is actually between 20 dan 60 meter. In practical applications, the distance between the access controller and the card reader is often too long, which may cause the controller to fail to receive the card reader information. Karena itu, Seabreeze Smart Card Co.,Ltd developed the Wiegand signal extender. The principle is to convert the Wiegand signal of the access card reader into RS485 signal, transmit it through the twisted pair, and then switch back to the Wiegand signal, so that the transmission advantage of RS485 can be fully utilized to improve the Wiegand signal. Transmission distance solves the problem of Wiegand signal transmission over long distances. Field test, this Wiegand signal extender transmission distance of more than 500 meter.

With the Seabreeze Smart Card Co.,Ltd's solution, in addition to solving the problem of reliable signal transmission, there are obvious cost advantages:
1. Wiegand signal extender is inexpensive.
2. Wiegand signal extender is easy to install and use.
3. Use low-cost super 5 network cable as the transmission line.
4. A standard network cable can transmit up to two sets of access control devices.

 

Formulir Kirim ( kami akan kembali Anda sesegera mungkin )

Nama:
*
E-mail:
*
Pesan:

Verifikasi:
4 + 4 = ?

Mungkin Anda menyukai juga

  • Layanan kami

    RFID / IOT / Access Control
    LF / HF / UHF
    Kartu / Tag / Inlay / Label
    Wristband / Keychain
    R / W Perangkat
    RFID Solusi
    OEM / ODM

  • Perusahaan

    Tentang kami
    tekan & Media
    Berita / blog
    karir
    Choice & ulasan
    Testimonial
    Program Afiliasi

  • Hubungi kami

    tel:0086 755 89823301
    jaringan:www.seabreezerfid.com