Doduerch ka Coupë Typ IC Card Holder
Produit Parameteren
Modell: F273-X
Produit Material: ABS / héich Temperatur resistent géint PC
Produit Faarf: duerchsichteg, wäiss, aner Faarwen
schaffen Temperatur: -35℃ ~ + 75 ℃
Stockage Temperatur: -40℃ ~ + 80 ℃
schaffen Fiichtegkeet: 0-95%
Spezifizéierung: 90× 60 × 6.0mm, oder der Gréisst uginn
Produit Gewiicht: 12g
3M Pasteable Typ IC Card Holder
Modell: F273-J
Material: ABS / héich Temperatur resistent géint PC
Faarf: duerchsichteg, gro, wäiss, aner Faarwen
schaffen Temperatur: -35℃ ~ + 75 ℃
Stockage Temperatur: -40℃ ~ + 80 ℃
schaffen Fiichtegkeet: 0-95%
Spezifizéierung: 90× 60 × 6.0mm, oder der Gréisst uginn
Produit Gewiicht: 12g
Leeschtung: eng gewëssen Distanz mat Glas, Kaart liesen Stabilitéit
Smart IC card is mainly used for large-distance vehicle management, the installation fixed RFID cards, and other applications require fixed a standard cards. Appearance generous and practical, fixed simple, convenient to insert and take out the cards, usually adsorbed or attached to the inside of the windshield of the vehicle, it can be screwed to wood floors, shelves, walls and so on. IC card fixed holder has suction cups (adsorption cups) type holder and adhesive holder type can be selected.
Method of Used:
Doduerch ka Coupë Typ IC Card Holder
1, choose good smooth of surface, with cleaning tools to wipe clean
2, to check whether there is dust or dirt, please go ahead to wipe clean
3, will be suction cups press in smooth face off, all required cups outside edge in contact with the glass surface.
4, along the outer Suction cups press with finger, make sure cups completely sealed with the glass surface.
The front-side, left and right sides have holes, can use Suction cups or screws to fix them in the wood plate, shelves, walls, etc.
The back-side is equipped with suction cups, can paste on the car window
3M Pasteable Typ IC Card Holder
1, choose a smooth, flat surface, wipe clean with a wiping tool
2, press the card seat on the smooth and flat working surface forcefully, and require that all the periphery be in contact with the glass surface
3, press with your finger on the backing cartridge to ensure that the cartridge is fully adhered to the work surface.