RFID, mana-mana di dunia.

Kad Sekitar / Accessories

» Kad Sekitar / Accessories

  • Pemegang Automobile Kad IC, Automobile Kad IC Pemegang Tetap, Pemegang Kad Pintar

    KATEGORI DAN TAGS:
    Kad Sekitar / Accessories , , , , ,

    model produk: F273-X/F273-J

    The Smart IC Card Holder can be conveniently mounted on the glass of an automobile, allowing the RF Reader to perform at its best.

    pertanyaan
    • spesifikasi
    • Penerangan

    Pemegang cawan sedutan Jenis Kad IC
    parameter produk
    model: F273-X
    bahan produk: ABS / suhu tinggi PC tahan
    warna produk: telus, putih, warna-warna lain
    Suhu bekerja: -35℃ ~ + 75 ℃
    suhu penyimpanan: -40℃ ~ + 80 ℃
    kelembapan bekerja: 0-95%
    spesifikasi: 90× 60 × 6.0 mm, atau saiz yang ditentukan
    berat produk: 12g

    3Pemegang M Pasteable Jenis Kad IC
    model: F273-J
    bahan: ABS / suhu tinggi PC tahan
    Warna: telus, kelabu, putih, warna-warna lain
    Suhu bekerja: -35℃ ~ + 75 ℃
    suhu penyimpanan: -40℃ ~ + 80 ℃
    kelembapan bekerja: 0-95%
    spesifikasi: 90× 60 × 6.0 mm, atau saiz yang ditentukan
    berat produk: 12g
    prestasi: jarak tertentu dengan kaca, kad membaca kestabilan

     

    Smart IC card is mainly used for large-distance vehicle management, the installation fixed RFID cards, and other applications require fixed a standard cards. Appearance generous and practical, fixed simple, convenient to insert and take out the cards, usually adsorbed or attached to the inside of the windshield of the vehicle, it can be screwed to wood floors, shelves, walls and so on. IC card fixed holder has suction cups (adsorption cups) type holder and adhesive holder type can be selected.

    Pemegang Automobile Kad IC, Automobile Smart Card Holder, Smart IC Card Fixed Holder, Car Suction Cups Type IC Card Holder, Automobile 3M Pasteable IC Card Holder, dari SeabreezeRFID.com

    Method of Used:
    Pemegang cawan sedutan Jenis Kad IC
    1, choose good smooth of surface, with cleaning tools to wipe clean
    2, to check whether there is dust or dirt, please go ahead to wipe clean
    3, will be suction cups press in smooth face off, all required cups outside edge in contact with the glass surface.
    4, along the outer Suction cups press with finger, make sure cups completely sealed with the glass surface.
    The front-side, left and right sides have holes, can use Suction cups or screws to fix them in the wood plate, shelves, walls, dan lain-lain.
    The back-side is equipped with suction cups, can paste on the car window

    3Pemegang M Pasteable Jenis Kad IC
    1, choose a smooth, flat surface, wipe clean with a wiping tool
    2, press the card seat on the smooth and flat working surface forcefully, and require that all the periphery be in contact with the glass surface
    3, press with your finger on the backing cartridge to ensure that the cartridge is fully adhered to the work surface.

     

    borang pertanyaan ( kami akan kembali kepada anda secepat mungkin )

    nama:
    *
    e-mel:
    *
    mesej:

    pengesahan:
    4 + 6 = ?

    Mungkin anda suka juga

  • Perkhidmatan kami

    RFID / IOT / Kawalan Akses
    LF / HF / UHF
    Kad / Tag / Inlay / Label
    Wristband / Keychain
    R / W Peranti
    RFID Penyelesaian
    OEM / ODM

  • syarikat

    Tentang kita
    akhbar & Media
    Berita / Blogs
    Kerjaya
    Anugerah & ulasan
    testimoni
    Program Affiliate

  • Hubungi Kami

    Tel:0086 755 89823301
    web:www.seabreezerfid.com